Lexmark Optra S 1620 User's Guide (7.1 MB) - Page 323
Removing a Flash Memory Option
View all Lexmark Optra S 1620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 323 highlights
Installing Options Removing a Flash Memory Option WARNING: Electronic components are easily damaged by static electricity. Touch something metal before you touch the flash memory option. 1 If necessary, follow the steps under "Accessing the Printer System Board" on page 293. 2 Locate the flash memory option. See page 296. 3 Push out on the metal clips at each end of the connector. 4 Rotate the flash memory option out to a 45° angle, and gently pull it out of the connector. Memory and Option Cards 5 Place the flash memory option in its original packaging. If you did not save the packaging, wrap it in paper and store it in a box. 6 If you need to install a replacement flash memory option or other option on the system board: - See "Flash Memory Option" on page 304. - See "Printer Memory Option" on page 299. - See "Option Cards" on page 308. 7 See "Closing the Printer System Board" on page 297 to reattach the shield and side door. Memory and Option Cards 307