Lexmark Optra S 1620 User's Guide (7.1 MB) - Page 165

Using Print Materials Using Your Printer 5 Place the paper into the paper tray with the recommended print side face down and the bottom edge going in first toward the paper length guide. Do not overload. Use the paper capacity mark and the top edge of the length guide as a reference for filling the tray. When the paper is loaded into the tray, the paper is stacked at an angle. The paper tray wall at the front of the tray is angled as this cross-section of the tray illustrates. If you readjust the length guide lever once the paper is in the tray, do not push it too far. Pushing the length guide too far causes the paper to move up along this angled wall and jam. Note: If you set the Paper Size to Universal for odd paper sizes, you need to move the length guide until the leading edge of the paper looks angled against the paper tray wall. Using Print Materials 149