Lexmark Optra S 1620 User's Guide (7.1 MB) - Page 272

Installing Options Installing an Optional Drawer If your printer is already set up, make sure the printer power is Off (O). Unplug the power cord, and disconnect any cables attached to the printer. An optional drawer consists of a support unit and a paper tray. 1 Remove the support unit from its packaging. Remove any packing tape. 2 Pull the paper tray out of the support unit. Remove any packing material and tape from the paper tray. Note: Options compatible with the Optra S 1855 are labeled with a colored circle. If the option is not labeled with a colored circle, do not install it on an Optra S 1855. See the table on page 1 for the location of the label. Note: Decide on a location to set the support unit. The printer will be placed on top of it, so allow enough clearance space. The location must be sturdy and large enough to accommodate the printer and all installed options. Optional Drawers 256 Optional Drawers