Lexmark Optra S 1620 User's Guide (7.1 MB) - Page 173

Using Your Printer Multipurpose Feeder Multipurpose Feeder Chapter 5 The multipurpose feeder, located on the front of the printer, is standard on the Optra S 1855, Optra S 1625, and Optra S 1255. It can be closed when you are not using it, making the printer more compact. The multipurpose feeder can hold several sizes and types of paper, such as transparencies, post cards, note cards, and envelopes. You may also want to use the multipurpose feeder for single page print jobs on letterhead, colored paper for use as separator sheets, or other special paper you do not keep in a paper tray. You can load approximately 100 sheets of 75 g/m2 (20 lb) paper of a specific size at a time. You can load approximately 12 envelopes at a time. You can load approximately 75 transparencies at a time. The maximum stack height for the loading of any print material is 10 mm (0.4 in.). Print material is loaded face up in the multipurpose feeder except when you load letterhead paper for duplex printing. The multipurpose feeder accepts print material within the following dimensions: Width Length Minimum 69.85 mm (2.75 in.) 127 mm (5 in.) Maximum 229 mm (9.01 in.) 355.6 mm (14 in.) Before loading print materials in the multipurpose feeder, make sure you select the paper size and paper type from the printer operator panel for the MP Feeder. When you print from the multipurpose feeder, also select the paper size and paper type from your software application for the print material you have loaded. Multipurpose Feeder 157