Lexmark Optra S 1620 User's Guide (7.1 MB) - Page 307

Output Expanders Installing Options Changing Output Bin Settings You can select output bin functions from the operator panel or from your software application, if it supports output bin selection. If the software setting differs from the operator panel setting, the software setting overrides the panel setting. For example, if you select Bin 2 from the operator panel, but the software specifies the printer standard bin, the printer prints to the printer standard bin. If you select Bin 2 from the operator panel, but the software specifies output bin 3, the printer prints to output bin 3. The factory default is the printer standard bin, which is shown on the operator panel as Standard Bin. When one output option is installed, the PAPER MENU includes an additional value for the Output Bin setting, which is Bin 1. For example, if all optional output expanders are installed for the Optra S 2455, the operator panel displays all values for the Output Bin setting in the PAPER MENU: Standard Bin, Bin 1, Bin 2, and Bin 3. Output Bin Linking Output bin linking is set from the PAPER MENU with the Configure Bins menu item. The values for this item are Mailbox, the factory default, Link and Link Optional. The Configure Bins menu item is only displayed if one or more output options are installed. The Mailbox setting allows the Standard Bin and any output options to be selected individually. Print material is placed in the output bin selected by the print job. If a print job does not specify the output bin, the printed material goes to the default output bin. See Output Bin on page 66 for more information. When an output bin is full, the Remove Paper message is displayed and the printer stops printing until the printed material is removed from the output bin. Output Expanders 291