Olympus C-2000 C-2000 Zoom Instruction manual (5.5 MB) - Page 228

E The pictures already taken do not appear on the LCD monitor. 1 The camera is in the Record mode. [ Set the Mode dial to " ". (P. 142) 2 There is no picture in the card. [ NO PICTURE appears on the LCD monitor. (P. 142) 3 There is a problem with the card. [ See the Error code chart. (P. 72) The LCD monitor is hard to read. 1 The brightness may be incorrectly set. [ Adjust the brightness. (P. 180) When the camera is connected to a computer, an error message appears while data is being transferred to the computer. 1 The cable is not plugged in correctly. [ Connect the cable correctly. (P. 214) 2 The power is OFF. [ Turn on the camera and set the Mode dial to " ". (P. 216) 3 The batteries are exhausted. [ Replace the batteries with new ones (P. 54) or use the optional AC adapter (P. 56). 4 The serial port is not selected correctly. [ Use the operating system software to make sure the serial port is selected correctly. 5 There is no available serial port. [ Make one available by following the computer's instructions. 228