Ricoh 2020D Scanner Reference - Page 35
Placing in the Auto Document, Feeder, When placing the original so
View all Ricoh 2020D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Placing Originals ❖ When placing the original so that the top edge touches the top left of Placing in the Auto Document the exposure glass Feeder When using the machine as a network TWAIN scanner, this orientation is the standard setting for the TWAIN driver. Normally, use this orientation for placing originals. The ADF allows you to place multiple originals at one time. Originals placed in the ADF can be scanned on one side or both sides. Note ❒ The duplex function is available only when you have installed the 3 optional ADF capable of scanning both sides of a sheet (ARDF). AAH005S 1. Positioning mark C Lower the exposure glass cover or the ADF. D Select the original orientation ac- cording to the orientation of the placed original. Reference p.27 "Specifying original orientation and setting originals" Proceed to p.31 "Original Orientation and Scan Area". ❖ Originals that can and cannot be placed in the ADF For information about the originals that can and cannot be placed in the ADF, see Copy Reference. Attempting to use unsuitable originals in the ADF can lead to a misfeed and damage to the originals. Place such originals directly on the exposure glass. Important ❒ For information about original sizes that can be detected automatically and notes on placing originals in the ADF, see Copy Reference. A Adjust the original guide to match the size of the originals. B Place the originals with the side to be scanned facing up. (For originals which are to be scanned on both sides, the first side should face up.) There are two orientations. 29