Ricoh 2020D Scanner Reference - Page 71
Using the Network TWAIN, Scanner Function
View all Ricoh 2020D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
6. Using the Network TWAIN Scanner Function This chapter describes the operations for scanning originals with the network TWAIN scanner using DeskTopBinder Lite. In addition, the preparation for using the network TWAIN scanner and some functions of the TWAIN driver are introduced. Preparation for Using the Network TWAIN Scanner To use the machine as a network TWAIN scanner, the preparation described below is required. 1 Connect to Network Connect the machine to the network with an Ethernet cable, IEEE 1394 (optional) cable, or use Wireless LAN (optional). See Network Guide. 2 Make System Settings Check the network settings in System Settings, and change if required. See Network Guide. 3 Install Software On the client computers, install the software required for using the network TWAIN scanner functions, such as a TWAIN driver and DeskTopBinder Lite. See p.19 "Software for Using a Network TWAIN Scanner". Network TWAIN Scanner Screen When using the machine as a network TWAIN scanner, it is not necessary to press the {Scanner} key on the control panel. When the TWAIN driver becomes active on a client computer, the display automatically switches to the following screen. Press [Exit] to use functions other than the network TWAIN scanner function. 65