Sony DCR-SC100 Operating Instructions - Page 92
Operation, Picture - video camera
View all Sony DCR-SC100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Additional information / Información complementaria Trouble check Operation Symptom The title search function does not work. indicator does not appear when using a tape with cassette memory. Cause and/or corrective actions • The tape has no cassette memory. m Use a tape with cassette memory. (p. 53) • CM SEARCH is set to OFF in the menu system. m Set it to ON. (p. 30) • There is no title in the tape. m Superimpose the titles. (p. 66) • The gold-plated connector of the tape is dirty or dusty. m Clean the gold-plated connector. (p. 73) Picture Symptom A vertical band appears when a subject such as lights or a candle flame is shot against a dark background. The picture is "noisy" or does not appear. v indicator flashes on the LCD screen. The picture is too bright or too dark. A vertical band appears when shooting a very bright subject. The picture does not appear on the LCD screen. An unknown picture is displayed on the LCD screen. A display such as "C:ππ:ππ" appears on the LCD screen. Cause and/or corrective actions • The contrast between the subject and background is too high. The camcorder is not malfunctioning. m Change locations. • The video heads may be dirty. m Clean the heads using the Sony DVM12CL cleaning cassette (not supplied). (p. 84) • The video heads may be dirty. m Clean the heads using the Sony DVM12CL cleaning cassette (not supplied). (p. 84) • LCD BRIGHT is not adjusted properly. m Adjust the brightness in the menu system. (p. 30) • The BACK LIGHT adjustment is on. m Press BACK LIGHT to turn c off. (p. 37) • The camcorder is not malfunctioning. • Incorporated fluorescent tube is worn out. m Please contact your nearest Sony dealer. • If 10 minutes elapse after you set the POWER switch to CAMERA without inserting a cassette, the camcorder automatically starts the demonstration or DEMO MODE is set to ON in the menu system. m Insert the cassette and the demonstration stops. You can deactivate the demonstration. (p. 30) • The self-diagnosis display function has activated. m Check the code and diagnosis the problem by refering to the code chart. (p. 94) Continued to the next page 91