Sony DCR-SC100 Operating Instructions - Page 93
AC power adaptor
View all Sony DCR-SC100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Trouble check Others Symptom While editing using the DV connecting cable, recording picture cannot be monitored. The camcorder becomes warm. The supplied Remote Commander does not work. No function works though the power is on. The numbers or letters of 5 characters is displayed as a counter. AC power adaptor Symptom The VTR/CAMERA or CHARGE lamp does not light. The CHARGE lamp flashes. Cause and/or corrective actions • Remove the DV connecting cable, and connect it again. • If the power of the cammcorder is on for a long time, it becomes warm, which is not malfunction. • Something is blocking the infrared rays. m Remove the obstacle. • The battery is not inserted with the correct polarity. m Insert the battery with the correct polarity. (p. 108) • The batteries are dead. m Insert new ones. (p. 108) • Disconnect the connection plug on the battery pack or on the AC power adaptor, then reconnect it in about 1 minute. Turn the power on. If the functions still do not work, press the RESET button at the lower left of the LCD screen using a sharp-pointed object. (If you press the RESET button, all the settings including the date and time return to the default.) (p. 105) • Self-diagnosis function was activated. m See the table in page 94 and treat the camcorder appropriately. Corrective actions • Disconnect the power cord. After about 1 minute, reconnect the power cord. (p. 7) • See the chart on the next page. 92