Sony DPP-FP90 Instruction Manual - Page 37

Cautions, When input of Pass code* is required

Page 37 highlights

For printing procedures, refer to the manual of the Bluetooth device you use. To select the printer from a Bluetoothcompliant device, select "Sony DPPFP70 ##"/"Sony DPP-FP90 ##". ("##" stands for the two figures from the right of the address displayed in the LCD screen.): When input of Pass code* is required Input "0000". You cannot change the pass cord with the printer. * Pass code is often referred to as "pass key" or "PIN code". Notes • The communication distance of the product may vary depending on the obstacles between the product (a human body, metal object, or wall) and mobile phone or other device. • Sensitivity of the Bluetooth communication may be affected in the following conditions: - When there is an obstacle between the product and the mobile phone or other product such as a human body, metal object, or a wall. - Were a wireless LAN is established or a microwave oven is being used near-by, or other electromagnetic wave is emitted. • Since a Bluetooth device and a wireless LAN (IEEE802.11b/g) device use the same frequency ranges, wave interferences may occur when the product is used near a device equipped with a wireless LAN. This may cause deterioration in the communication speed and connection conditions. If this occurs, take the following measures: - Keep a distance of at the nearest 10 m from a wireless LAN device when you connect the product to the mobile phone. - Turn off the wireless LAN device in case you should use the product within 10 m from the wireless LAN device. • It is not guaranteed that this product works with all devices enabled with Bluetooth wireless technology. • Do not use the DPPA-BT1 outsides the area you purchased it. Depending on the areas, the use of this product may infringe the wave regulations and may be subject to its penalty. • Sony cannot assume any responsibilities for any information leakage that may be caused in Bluetooth communications. • Sony cannot accept responsibilities for any failure to satisfy the protection requirements resulting from a non-recommended modification or use of the product. • For customer support information, please refer to the operating instructions of your printer. P Cautions • RadiowavesfromaBluetoothdevicemay adversely affect the operations of electrical and medical devices, and could lead to accidents due to malfunctions. Make sure to turn off the product and mobile phone and do not use this product in the following places: - Insidethemedicalfacilities,trains, airplanes, gas stations or other places that may emit flammable gas. - nearautomaticdoorsorfirealarmsor other automatically controlled devices. • Keepthisproductatleast22cmawayfrom cardiac pacemakers. Radio waves from this product may adversely affect the operation of cardiac pacemakers. • Donotdisassembleormodifythisproduct. Doing so could result in injury, electric shock, or fire. 37 GB Printing from a PictBridge camera or external device

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84

37
GB
Printing from a PictBridge camera or external device
For printing procedures, refer to the
manual of the Bluetooth device you
use.
To select the printer from a Bluetooth-
compliant device, select “Sony DPP-
FP70 ##”/“Sony DPP-FP90 ##”.
(“##” stands for the two figures from
the right of the address displayed in
the LCD screen.):
When input of Pass code* is required
Input “0000”. You cannot change the pass
cord with the printer.
*
Pass code is often referred to as “pass
key” or “PIN code”.
Notes
The communication distance of the product
may vary depending on the obstacles between
the product (a human body, metal object, or
wall) and mobile phone or other device.
Sensitivity of the Bluetooth communication
may be affected in the following conditions:
-
When there is an obstacle between the
product and the mobile phone or other
product such as a human body, metal object,
or a wall.
-
Were a wireless LAN is established or a
microwave oven is being used near-by, or
other electromagnetic wave is emitted.
Since a Bluetooth device and a wireless LAN
(IEEE802.11b/g) device use the same frequency
ranges, wave interferences may occur when the
product is used near a device equipped with a
wireless LAN. This may cause deterioration in
the communication speed and connection
conditions.
If this occurs, take the following
measures:
-
Keep a distance of at the nearest 10 m from a
wireless LAN device when you connect the
product to the mobile phone.
– Turn off the wireless LAN device in case you
should use the product within 10 m from the
wireless LAN device.
It is not guaranteed that this product works
with all devices enabled with Bluetooth
wireless technology.
Do not use the DPPA-BT1 outsides the area you
purchased it. Depending on the areas, the use
of this product may infringe the wave
regulations and may be subject to its penalty.
Sony cannot assume any responsibilities for any
information leakage that may be caused in
Bluetooth communications.
Sony cannot accept responsibilities for any
failure to satisfy the protection requirements
resulting from a non-recommended
modification or use of the product.
For customer support information, please refer
to the operating instructions of your printer.
P
Cautions
• RadiowavesfromaBluetoothdevicemay
adverselyaffecttheoperationsofelectrical
and medical devices, and could lead to
accidentsduetomalfunctions.
Makesureto
turnofftheproductandmobilephoneanddo
notusethisproductinthefollowingplaces:
-
Insidethemedicalfacilities,trains,
airplanes,gasstationsorotherplaces
thatmayemitflammablegas.
-
nearautomaticdoorsorfirealarmsor
otherautomaticallycontrolleddevices.
• Keepthisproductatleast22cmawayfrom
cardiacpacemakers.Radiowavesfromthis
productmayadverselyaffecttheoperationof
cardiacpacemakers.
• Donotdisassembleormodifythisproduct.
Doing so could result in injury, electric shock,
orfire.