Sony DPP-FP90 Instruction Manual - Page 74
About the SD card, About the CompactFlash card, Type II and CF+Card Type I/Type II
View all Sony DPP-FP90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
• Do not touch the terminal of the "Memory Stick" with your hand or a metal object. • Do not strike, bend or drop the "Memory Stick". • Do not disassemble or modify the "Memory Stick". • Do not expose the "Memory Stick" to water. • Do not use or store the "Memory Stick" under the following conditions: - Locations beyond the required operational conditions including locations such as the hot interior of a car parked in the sun or/ and in the summer, the outdoors exposed to direct sunlight, or a place near a heater. - Humid locations or locations with corrosive substances present About the SD card The SD card slot of the printer allows you to use the following: • SD memory card*1 • miniSD card • SDHC memory card*2 • MMC standard memory card*3 We do not guarantee proper operations for all types of SD memory cards and MMC standard memory cards. *1 The printer has been demonstrated as operable with an SD card with a capacity of 2 GB or smaller. *2 The printer has been demonstrated as operable with an SDHC card with a capacity of 4 GB or smaller. *3 The printer has been demonstrated as operable with an MMC standard memory card with a capacity of 2 GB or smaller . Notes on use • When using a card, make sure to check correct insertion direction of the card and correct insertion slot. • You cannot read or write the data subject to the copyright protection. • Do not strike, drop, or bend a card. • Do not disassemble or modify a card. • Do not expose a card to water. • Avoid using a card in areas subject to high humidity, since it may be easily affected by the humidity. • Do not use or store a card in a location subject to: - extremely high temperature such as the hot inside of a car or the outdoors exposed to a direct sunlight, or a place near a heater. - direct sunlight - high humidity or corrosive substances - static electricity or electrical noises • When you carry or store a card, put it in the case supplied with it. • Do not remove a card or turn off the printer while the printer is reading or writing data and the access indicator is flashing. Otherwise, data may be rendered unreadable or erased. About the CompactFlash card The CompactFlash card slot of the printer allows you to use the following: • CompactFlash Storage Card (Type I/ Type II) and CF+Card (Type I/Type II)compatible CompactFlash Storage Card*4. • Micro Drive • COMPACT VAULT You can also use the following by using a commercially available CompactFlash card adaptor*5: • Smart Media card*5 • xD-Picture Card*5 However, we do not guarantee proper operations for all types of CompactFlash cards. *4 Use a CompactFlash card with a power specification of 3.3V or 3.3V/5V. You cannot use a type for 3V or 5V only. Do not insert other types of CompactFlash card into the printer's insertion slot. The printer may be damaged. *5 When using a commercially available CompactFlash card adaptor, refer to the operating instructions of the adaptor you use for how to install the card and adaptor. 74 GB