Home » Sony Manuals » Security Cameras » Sony SNC-RZ50N » Manual Viewer

Sony SNC-RZ50N User Guide - Page 29

Controlling alarm output 1

UPC - 027242240377

Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Operating the Camera To use this function, you need to make Image memory active and set the details in the Trigger menu of the Administrator menu (page 79). 1 Display the image on the monitor window. 2 Select Image memory from the trigger drop-down list. 3 Click . The still image of the moment you click is captured, and the image file is recorded. Controlling alarm output 1, 2 You can control Alarm output 1, 2. To use this function, you need to make Alarm output 1 or Alarm output 2 active in the Trigger menu of the Administrator menu (page 79). 1 Display the image on the monitor window. 2 Select Alarm output1 or Alarm output2 from the trigger drop-down list. 2 Select Day/Night from the trigger drop-down list. 3 Click . Each click switches the Day/Night function alternately between On (night mode) and Off (day mode). Note If Day/Night mode in the Trigger-Day/Night menu (page 80) is set to Disable or Auto, you cannot control the Day/Night function by clicking . Playing the audio file stored in the camera You can play the audio file previously stored in the camera using the SNC audio upload tool. To use this function, you need to make Voice alert1, Voice alert2 and Voice alert3 active in the Trigger menu of the Administrator menu (page 80). 1 Display the image on the monitor window. 2 Select Voice alert1, Voice alert2 or Voice alert3 from the trigger drop-down list. 3 Click . The alarm output is switched by clicking. The alarm output mode can be selected from Toggle or Timer of Alarm output 1, 2 in the Trigger menu (page 79). Tip For the connection of peripheral devices to the alarm output of the I/O port, see the supplied Installation Manual. Controlling Day/Night function You can control the Day/Night function On (night mode) and Off (day mode). To use this function, you need to make Day/Night active in the Trigger menu of the Administrator menu (page 80). 1 Display the image on the monitor window. 3 Click . Playback of the selected audio file starts and the playback sound is output from the speaker connected to the camera. 29 Using the Trigger Button

Section	Page
Table of Contents	2
Overview	4
Features	4
Precautions	5
How to Use This User’s Guide	6
System Requirements	7
Preparation	8
Assigning the IP Address to the Camera	8
Assigning an IP address using the IP Setup Program	8
When using Windows XP Service Pack 2	10
When using Windows Vista	12
Accessing the Camera Using the Web Browser	15
Basic Configuration by the Administrator	17
Operating the Camera	18
Administrator and User	18
Logging in to Homepage - Welcome Page	19
Logging in as a user	19
Displaying the Administrator menu directly	20
About viewers	20
Configuration of Main Viewer	21
Main menu	22
Camera control section	22
Monitor image	23
Controlling the Monitor Image	24
Monitoring the camera image	24
Zooming in the monitor image	24
Capturing a Monitor Image	25
Capturing a monitor image	25
Saving the captured image	25
Operating the Camera	26
Controlling via the control panel	26
Panning and tilting by clicking the monitor image	26
Panning, tilting and zooming by specifying the area	26
Zooming an image by the camera zoom bar	27
Moving the camera to a preset position	27
Controlling the Camera on a Panorama Image	27
Facing the camera toward a specified point	27
Using the Trigger Button	28
Sending a monitor image via e-mail	28
Sending a monitor image to an FTP server	28
Recording a camera image as a still image	28
Controlling alarm output 1, 2	29
Controlling Day/Night function	29
Playing the audio file stored in the camera	29
Switching TCP/UDP Transmission Mode	30
Administrating the Camera	31
Basic Operations of Administrator Menu	31
How to setup the Administrator menu	31
Configuration of Administrator menu	32
Configuring the System - System Menu	33
System Tab	33
Date & time Tab	35
Initialize Tab	36
System log Tab	37
Access log Tab	37
Setting the Camera Image and Audio - Camera Menu	38
Common Tab	38
Picture Tab	39
Day/Night Tab	40
Video codec Tab	41
Streaming Tab	43
Configuring the Network - Network Menu	44
Network Tab	44
Wireless Tab - Setting of wireless connection	45
Dynamic IP address notification Tab - Notifying the IP Address	48
SSL Tab - Setting the SSL function	49
How to install the CA certificate	52
To remove the CA certificate which has been installed	53
Using the 802.1X Authentication Function - 802.1X Menu	54
System configuration of 802.1X network	54
Common Tab - Basic setting of 802.1X authentication function	54
Client certificate Tab	55
CA certificate Tab	57
Setting the 802.1X authentication function - Example of Windows Server 2003	57
Setting the User - User Menu	61
Setting the Security - Security Menu	62
Saving the Camera Position and Action - Preset position Menu	63
Position Tab - Saving pan/tilt/ zoom position	63
Tour Tab - Setting a tour	64
Sending an Image via E- mail - e-Mail (SMTP) Menu	65
Common Tab - Setting the e-Mail (SMTP) Function	65
Alarm sending Tab - Setting the e- mail sending mode when detecting the alarm	66
Periodical sending Tab - Setting the periodical e-mail sending mode	67
Sending Images to FTP Server - FTP client Menu	68
Common Tab - Setting the FTP client function	68
Alarm sending Tab - Setting the FTP client action when detecting the alarm	69
Periodical sending Tab - Setting the periodical FTP client activity	70
Recording Images in Memory - Image memory Menu	71
Common Tab - Setting the image memory function	72
Alarm recording Tab - Setting the Image memory function when detecting the alarm	73
Periodical recording Tab - Setting the periodical recording mode	74
Folder structure of image memory	74
Downloading Images from the Camera - FTP server Menu	75
Setting the Alarm Output - Alarm output Menu	76
Alarm out 1, 2 Tab	76
Outputting Audio Linked to Alarm Detection - Voice alert Menu	77
Voice alert 1, 2, 3 Tab	77
Setting the Operations from the Viewer - Trigger Menu	78
Setting the Schedule - Schedule Menu	80
Setting the Alarm Buffer - Alarm buffer Menu	81
Setting the Object Detection Function - Object detection Menu	82
What is unattended object detection?	82
Common Tab	84
Unattended object setting Tab	88
Configuration Tab	89
Transmitting with External Equipment Using the External Serial Terminal - Serial Menu	89
Using DDNS Service - DDNS setting Menu	91
Others	94
Using the Supplied IP Setup Program	94
Starting the IP Setup Program	94
Bandwidth control Tab	94
Date time Tab	95
Rebooting the Camera	95
Using the SNC audio upload tool - Transmitting Audio to Camera	96
Installing the SNC audio upload tool	96
Connecting the Camera to the Computer	96
Using the SNC audio upload tool	97
Using the SNC video player - Playing Video/ Audio File Recorded with Camera	101
Installing the SNC video player	101
Using the SNC video player	102
Using the SNC panorama creator - Creating a Panorama Image	103
Installing the SNC panorama creator	103
Using the SNC panorama creator	103
Creating and transmitting a panorama image	104
Saving a custom image to the camera	104
Using the SNC privacy masking tool - Masking a Camera Image	105
Installing the SNC privacy masking tool	105
Using the SNC privacy masking tool	106
Setting a privacy mask	107
Using the Custom Homepage Installer	108
Uploading the homepage to the camera using the Custom Homepage Installer	108
Assigning the IP Address to the Camera Using ARP Commands	111
Using the SNMP	112
1. Inquiry Commands	112
2. Setting Commands	112
When You Discard the Camera	113
Glossary	114

Match case Limit results 1 per page

Operating the Camera

Using the Trigger Button

To use this function, you need to make

Image memory

active and set the details in the Trigger menu of the

Administrator menu (page 79).

Display the image on the monitor window.

Select

Image memory

from the trigger drop-down

list.

Click

The still image of the moment you click is captured,

and the image file is recorded.

Controlling alarm output 1, 2

You can control Alarm output 1, 2.

To use this function, you need to make

Alarm output 1

Alarm output 2

active in the Trigger menu of the

Administrator menu (page 79).

Display the image on the monitor window.

Select

Alarm output1

Alarm output2

from the

trigger drop-down list.

Click

The alarm output is switched by clicking.

The alarm output mode can be selected from

Toggle

Timer

Alarm output 1, 2

in the

Trigger menu (page 79).

Tip

For the connection of peripheral devices to the alarm

output of the I/O port, see the supplied Installation

Manual.

Controlling Day/Night function

You can control the Day/Night function On (night mode)

and Off (day mode).

To use this function, you need to make

Day/Night

active

in the Trigger menu of the Administrator menu

(page 80).

Display the image on the monitor window.

Select

Day/Night

from the trigger drop-down list.

Click

Each click switches the Day/Night function

alternately between On (night mode) and Off (day

mode).

Note

Day/Night mode

in the Trigger-Day/Night menu

(page 80) is set to

Disable

Auto

, you cannot control

the Day/Night function by clicking

Playing the audio file stored in the

camera

You can play the audio file previously stored in the

camera using the SNC audio upload tool.

To use this function, you need to make

Voice alert1

Voice alert2

and

Voice alert3

active in the Trigger menu

of the Administrator menu (page 80).

Display the image on the monitor window.

Select

Voice alert1

Voice alert2

Voice alert3

from the trigger drop-down list.

Click

Playback of the selected audio file starts and the

playback sound is output from the speaker

connected to the camera.