Sony SNC-RZ50N User Guide - Page 72

Administrating the Camera Common Tab - Setting the image memory function Image memory To use the image memory function, select On. Selected root directory Select a memory in which you want to save an image. The current memory space is displayed on the right. Built-in memory: Built-in memory of this camera ATA memory card: ATA memory card inserted into the PC card slot of the camera. CF memory card: CF memory card inserted into the CF card slot of the camera. Notes • The image and audio files recorded in the built-in memory are deleted when the Selected root directory setting is changed. • When Selected root directory is set to an option other than Built-in memory, "empty" is displayed in the memory space box and you cannot access the built-in memory. Overwrite Select On to overwrite the file or not when there is insufficient memory space to record the image in the built-in memory, ATA memory card or CF memory card. On: Overwrite is enabled and old files will be overwritten in the order of date. Off: Overwrite is prohibited. No recording will be performed. Capacity warning Select On to send a warning mail to the Administrator when the memory space of the built-in memory, ATA memory card or CF memory card is low or the memory is full. Select Off if you do not want to send a warning mail. Note When Overwrite is set to On, a warning mail is not sent to the Administrator. SMTP server name Type the name of the SMTP server for sending an email, using up to 64 characters. Otherwise type the IP address of the SMTP mail server. Authentication Select the authentication required when you send an email. Off: Select if no authentication is required when an email is sent. On: Select if authentication is required when an e-mail is sent. Select one of the authentication methods from the following and specify the POP server name, User name and Password as required. SMTP: Select when SMTP authentication is required. POP before SMTP: Select when POP before SMTP authentication is required. Note When you set Authentication to On, be sure to select either or both SMTP or/and POP before SMTP. POP server name This is necessary when POP before SMTP is selected for Authentication. Type a POP (receiving mail) server name using up to 64 characters, or type the IP address of the POP server. This setting is necessary when the SMTP server that sends emails performs authentication using the POP user account. User name, Password Type the user name and the password of the user who owns the e-mail account. This setting is necessary when the SMTP server that sends e-mails performs authentication. Administrator e-mail address Type the e-mail address of the recipient of a warning mail (e-mail address of the camera Administrator), using up to 64 characters. OK/Cancel See "Buttons common to every menu" on page 31. 72 Recording Images in Memory - Image memory Menu