Sony SNC-RZ50N User Guide - Page 46
DNS server, Host name, Domain suffix, Antenna, Security, IP address, Subnet mask, Default gateway
UPC - 027242240377
View all Sony SNC-RZ50N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Administrating the Camera IP address Type the IP address of the camera. Subnet mask Type the subnet mask. Default gateway Type the default gateway. DNS server Configure the DNS server address. Obtain DNS server address automatically: Select this option to obtain the address of DNS server automatically. It can be set only when Obtain an IP address automatically (DHCP) is selected in the Wireless tab. Use the following DNS server address: Select this option when you set a fixed address as the IP address of DNS server. With this setting, specify the addresses on Primary DNS server and Secondary DNS server manually. Note When you select Obtain DNS server address automatically, make sure that a DHCP server is operating on the network. Primary DNS server Type the IP address of the primary DNS server. Secondary DNS server Type the IP address of the secondary DNS server, if necessary. Host name Type the wireless network host name of the camera to be transmitted to the DHCP server. This setting is valid only when Obtain an IP address automatically (DHCP) is selected in the Wireless tab. Domain suffix Type the wireless network domain suffix of the camera to be transmitted to the DHCP server. This setting is valid only when Obtain an IP address automatically (DHCP) is selected in the Wireless tab. Note The domain suffix is sent to the DHCP server as FQDN (Fully Qualified Domain Suffix) information when Host name is set. Type Select the network connection type. Ad hoc mode: Select this when connecting to a computer directly. With this setting, specify a wireless channel. Infrastructure mode: Select this when connecting to a computer via an access point or a wireless router. Notes • The setting of the HTTP port number is common to the setting in the Network tab. • With Ad hoc mode, you cannot select Use WEP key automatically generated of WEP, or WPA or WPA2 on Security. • When you set Security to WPA or WPA2 and change Infrastructure mode to Ad hoc mode, Security setting is automatically changed to None. Antenna Select one of the following antenna settings when you use the SNCA-CFW1 or SNCA-CFW5 wireless card (optional), or the SNCA-AN1 wireless LAN antenna (optional). Internal: Select this when you perform communications using the antenna built in the wireless card. This setting is suitable for short-range and omnidirectional communications. External: Select this when you perform long-range communications using the SNCA-AN1 wireless LAN antenna connected to the wireless card. Diversity: Select this when you perform both shortrange and long-range communications using the SNCA-AN1 wireless LAN antenna connected to the wireless card. The antenna that has higher sensitivity is selected automatically. Note When you are using SNCA-CFW5 and select Diversity, SNCA-AN1 is selected on the transmitting side and an antenna is selected automatically on the receiving side. SSID Type the ID to identify the wireless network you want to access using up to 32 ASCII characters (alphanumeric). For your security, be sure to change the factory setting. Security Configure the security for a wireless network. None: Select this option when no security is set. This setting is not recommended for reasons of protecting your computer from harm. 46 Configuring the Network - Network Menu