Home » Sony Manuals » Security Cameras » Sony SNC-RZ50N » Manual Viewer

Sony SNC-RZ50N User Guide - Page 99

Voice alert tab, Obtain an IP address automatically, IP address, Model, Serial, Status, Ready

UPC - 027242240377

Add to My Manuals
Save this manual to your list of manuals

Page 99 highlights

Others N (start) / x (stop) Click N (start) to start audio transmission. The transmission speed is displayed in the Bitrate box during transmission. You can adjust the microphone volume and enable/disable the muting, if necessary. To stop the audio transmission, click x (stop). Notes • Audio transmission stops if you switch the tab during the transmission. • Audio may be interrupted when the IP address is changed if Obtain an IP address automatically (DHCP) is set on IP address in the Network menu. • Audio may be interrupted if you transmit it to many cameras simultaneously. Sound adjustment and indicators Adjust the microphone input volume by moving the slider bar. You can adjust the volume even during transmission. Click to enable/disable sound muting. The microphone input volume is displayed at the Level. The transmission rate is displayed in the Bitrate box. IP address: Displays the IP address of the network camera. "DHCP" is shown at the end of the IP address when the IP address is obtained with a DHCP server. SSL connection is enabled if you set SSL function to "ON" in the SSL tab of the Network menu. SSL connection is established even when "Allow HTTP connection for some clients" is checked. mark appears on the left side of IP address of "Target camera(s)" in this tool when SSL connection is established. (The model on sale in China does not support the SSL function.) Model: Displays the model name of the network camera. Serial: Displays the serial number of the network camera. Status: Displays the current status of the camera. Ready: The camera is ready for connection. Connected: The camera connection is successful. Fault: The camera connection is unsuccessful. Sending: Audio data being transmitted Voice alert tab Use this menu to record the sound through the microphone connected to the computer and upload the recorded audio file to the camera. You can upload the audio file to multiple cameras selected from the camera list simultaneously. Click this button to hide the camera list. Click it again to display the camera list. Target camera(s) (Camera list) Displays the cameras selected with the camera select checkbox of the camera list in the Setting tab. The list shows the information and status of the selected cameras. (playback) To start playback, open the recorded file or another audio file and click this icon. You can check the recorded sound or the contents of the selected audio file. During playback, the progress bar shows playback progress. 99 Using the SNC audio upload tool - Transmitting Audio to Camera

Section	Page
Table of Contents	2
Overview	4
Features	4
Precautions	5
How to Use This User’s Guide	6
System Requirements	7
Preparation	8
Assigning the IP Address to the Camera	8
Assigning an IP address using the IP Setup Program	8
When using Windows XP Service Pack 2	10
When using Windows Vista	12
Accessing the Camera Using the Web Browser	15
Basic Configuration by the Administrator	17
Operating the Camera	18
Administrator and User	18
Logging in to Homepage - Welcome Page	19
Logging in as a user	19
Displaying the Administrator menu directly	20
About viewers	20
Configuration of Main Viewer	21
Main menu	22
Camera control section	22
Monitor image	23
Controlling the Monitor Image	24
Monitoring the camera image	24
Zooming in the monitor image	24
Capturing a Monitor Image	25
Capturing a monitor image	25
Saving the captured image	25
Operating the Camera	26
Controlling via the control panel	26
Panning and tilting by clicking the monitor image	26
Panning, tilting and zooming by specifying the area	26
Zooming an image by the camera zoom bar	27
Moving the camera to a preset position	27
Controlling the Camera on a Panorama Image	27
Facing the camera toward a specified point	27
Using the Trigger Button	28
Sending a monitor image via e-mail	28
Sending a monitor image to an FTP server	28
Recording a camera image as a still image	28
Controlling alarm output 1, 2	29
Controlling Day/Night function	29
Playing the audio file stored in the camera	29
Switching TCP/UDP Transmission Mode	30
Administrating the Camera	31
Basic Operations of Administrator Menu	31
How to setup the Administrator menu	31
Configuration of Administrator menu	32
Configuring the System - System Menu	33
System Tab	33
Date & time Tab	35
Initialize Tab	36
System log Tab	37
Access log Tab	37
Setting the Camera Image and Audio - Camera Menu	38
Common Tab	38
Picture Tab	39
Day/Night Tab	40
Video codec Tab	41
Streaming Tab	43
Configuring the Network - Network Menu	44
Network Tab	44
Wireless Tab - Setting of wireless connection	45
Dynamic IP address notification Tab - Notifying the IP Address	48
SSL Tab - Setting the SSL function	49
How to install the CA certificate	52
To remove the CA certificate which has been installed	53
Using the 802.1X Authentication Function - 802.1X Menu	54
System configuration of 802.1X network	54
Common Tab - Basic setting of 802.1X authentication function	54
Client certificate Tab	55
CA certificate Tab	57
Setting the 802.1X authentication function - Example of Windows Server 2003	57
Setting the User - User Menu	61
Setting the Security - Security Menu	62
Saving the Camera Position and Action - Preset position Menu	63
Position Tab - Saving pan/tilt/ zoom position	63
Tour Tab - Setting a tour	64
Sending an Image via E- mail - e-Mail (SMTP) Menu	65
Common Tab - Setting the e-Mail (SMTP) Function	65
Alarm sending Tab - Setting the e- mail sending mode when detecting the alarm	66
Periodical sending Tab - Setting the periodical e-mail sending mode	67
Sending Images to FTP Server - FTP client Menu	68
Common Tab - Setting the FTP client function	68
Alarm sending Tab - Setting the FTP client action when detecting the alarm	69
Periodical sending Tab - Setting the periodical FTP client activity	70
Recording Images in Memory - Image memory Menu	71
Common Tab - Setting the image memory function	72
Alarm recording Tab - Setting the Image memory function when detecting the alarm	73
Periodical recording Tab - Setting the periodical recording mode	74
Folder structure of image memory	74
Downloading Images from the Camera - FTP server Menu	75
Setting the Alarm Output - Alarm output Menu	76
Alarm out 1, 2 Tab	76
Outputting Audio Linked to Alarm Detection - Voice alert Menu	77
Voice alert 1, 2, 3 Tab	77
Setting the Operations from the Viewer - Trigger Menu	78
Setting the Schedule - Schedule Menu	80
Setting the Alarm Buffer - Alarm buffer Menu	81
Setting the Object Detection Function - Object detection Menu	82
What is unattended object detection?	82
Common Tab	84
Unattended object setting Tab	88
Configuration Tab	89
Transmitting with External Equipment Using the External Serial Terminal - Serial Menu	89
Using DDNS Service - DDNS setting Menu	91
Others	94
Using the Supplied IP Setup Program	94
Starting the IP Setup Program	94
Bandwidth control Tab	94
Date time Tab	95
Rebooting the Camera	95
Using the SNC audio upload tool - Transmitting Audio to Camera	96
Installing the SNC audio upload tool	96
Connecting the Camera to the Computer	96
Using the SNC audio upload tool	97
Using the SNC video player - Playing Video/ Audio File Recorded with Camera	101
Installing the SNC video player	101
Using the SNC video player	102
Using the SNC panorama creator - Creating a Panorama Image	103
Installing the SNC panorama creator	103
Using the SNC panorama creator	103
Creating and transmitting a panorama image	104
Saving a custom image to the camera	104
Using the SNC privacy masking tool - Masking a Camera Image	105
Installing the SNC privacy masking tool	105
Using the SNC privacy masking tool	106
Setting a privacy mask	107
Using the Custom Homepage Installer	108
Uploading the homepage to the camera using the Custom Homepage Installer	108
Assigning the IP Address to the Camera Using ARP Commands	111
Using the SNMP	112
1. Inquiry Commands	112
2. Setting Commands	112
When You Discard the Camera	113
Glossary	114

Match case Limit results 1 per page

Others

Using the SNC audio upload tool — Transmitting Audio to Camera

(start) /

(stop)

Click

(start) to start audio transmission. The

transmission speed is displayed in the Bitrate box during

transmission. You can adjust the microphone volume

and enable/disable the muting, if necessary.

To stop the audio transmission, click

(stop).

Notes

•

Audio transmission stops if you switch the tab during

the transmission.

•

Audio may be interrupted when the IP address is

changed if

Obtain an IP address automatically

(DHCP)

is set on

IP address

in the Network menu.

•

Audio may be interrupted if you transmit it to many

cameras simultaneously.

Sound adjustment and indicators

Adjust the microphone input volume by moving the

slider bar.

You can adjust the volume even

during transmission.

Click

to enable/disable sound muting. The

microphone input volume is displayed at the Level.

The transmission rate is displayed in the Bitrate box.

Click this button to hide the camera list. Click it again to

display the camera list.

Target camera(s) (Camera list)

Displays the cameras selected with the camera select

checkbox of the camera list in the Setting tab.

The list shows the information and status of the selected

cameras.

IP address:

Displays the IP address of the network

camera. “DHCP” is shown at the end of the IP

address when the IP address is obtained with a

DHCP server.

SSL connection is enabled if you set SSL function to

“ON” in the SSL tab of the Network menu. SSL

connection is established even when “Allow HTTP

connection for some clients” is checked.

mark

appears on the left side of IP address of “Target

camera(s)” in this tool when SSL connection is

established. (The model on sale in China does not

support the SSL function.)

Model:

Displays the model name of the network

camera.

Serial:

Displays the serial number of the network

camera.

Status:

Displays the current status of the camera.

Ready:

The camera is ready for connection.

Connected:

The camera connection is successful.

Fault:

The camera connection is unsuccessful.

Sending:

Audio data being transmitted

Voice alert tab

Use this menu to record the sound through the

microphone connected to the computer and upload the

recorded audio file to the camera. You can upload the

audio file to multiple cameras selected from the camera

list simultaneously.

(playback)

To start playback, open the recorded file or another

audio file and click this icon.

You can check the recorded sound or the contents of the

selected audio file. During playback, the progress bar

shows playback progress.