Sony SNC-RZ50N User Guide - Page 48
Dynamic IP address notification Tab - Notifying the IP Address, e-Mail SMTP notification - cgi
UPC - 027242240377
View all Sony SNC-RZ50N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Administrating the Camera Dynamic IP address notification Tab - Notifying the IP Address When Obtain an IP address automatically (DHCP) is selected in the Network tab or Wireless tab, you can send notification of completion of the network settings using the SMTP or HTTP protocol. e-Mail (SMTP) notification Select On to send an e-mail when the DHCP setting is completed. SMTP server name Type the name or IP address of the SMTP server for sending an e-mail, using up to 64 characters. Authentication Select the authentication required when you send an email. Off: Select if no authentication is required when an e- mail is sent. On: Select if authentication is required when an e-mail is sent. Select one of the authentication methods from the following and specify the POP server name, User name and Password as required. SMTP: Select when SMTP authentication is required. POP before SMTP: Select when POP before SMTP authentication is required. Note When you set Authentication to On, make sure to select either or both SMTP or/and POP before SMTP. POP server name It is necessary when POP before SMTP is selected for Authentication. Type the POP (receiving mail) server name using up to 64 characters. Or type the IP address of the POP server. This setting is necessary when the SMTP server that sends e-mails performs authentication using the POP user account. User name, Password Type the user name and password of the user who owns the mail account using up to 64 characters. This setting is necessary when the SMTP server that sends e-mails performs authentication. Recipient e-mail address Type the recipient e-mail address using up to 64 characters. You can specify only one recipient e-mail address. Administrator e-mail address Type the e-mail address of the camera administrator using up to 64 characters. This is used as the reply address or the address for a system mail from the mail server. Subject Type the subject/title of the e-mail using up to 64 characters. Message Type the text of the e-mail using up to 384 characters. (A line break is equivalent to 2 characters.) You can describe the information of the acquired IP address, etc. using the special tags mentioned below. HTTP notification Select On to output a command to the HTTP server when the DHCP setting is completed. Using this function, you can configure a useful system, for example, to view the access log stored in the HTTP server or start an external CGI program. URL Specify the URL to send HTTP requests, using up to 256 characters. The URL is normally written as follows: ip_address: Type the IP address or host name of the host to which you want to connect. [:port]: Specify the port number to which you want to connect. If you want to use the established port number 80, you do not need to input this value. 48 Configuring the Network - Network Menu