Sony SNC-RZ50N User Guide - Page 94
Others, Using the Supplied IP Setup Program, Starting the IP Setup Program, Bandwidth control Tab
UPC - 027242240377
View all Sony SNC-RZ50N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Others This section explains how to use the application software and commands, including the supplied CDROM. Using the Supplied IP Setup Program Explains the functions except those of the Network tab in the IP Setup Program. To install the IP Setup Program, to assign an IP address and to set the network, see "Assigning the IP Address to the Camera" on page 8 in "Preparation". Notes • The IP Setup Program may not operate correctly if you use a personal firewall or antivirus software in your computer. In that case, disable the software or assign an IP address to the camera using another method. For example, see "Assigning the IP Address to the Camera Using ARP Commands" on page 111. • If you are using Windows XP Service Pack 2 or Windows Vista, disable the Windows Firewall function. Otherwise the IP Setup Program will not operate correctly. For the setting, see "Configuring Windows Firewall" in "When using Windows XP Service Pack 2" on page 10 or "Configuring Windows Firewall" in "When using Windows Vista" on page 12. Starting the IP Setup Program Select Program from the Start menu of Windows, then select Program, IP Setup Program and IP Setup Program in sequence. The IP Setup Program starts. Network tab appears. The IP Setup Program detects cameras connected to the local network and lists them on the Network tab window. When you are using Windows Vista, message "User Account Control - An unidentified program wants access to your computer" may appear. In this case, click Allow. Bandwidth control Tab You can set the communication bandwidth for the JPEG image. Note The bandwidth cannot be controlled for the MPEG4 or H.264 image. 1 Click the Bandwidth control tab to display the bandwidth setting window. The current bandwidth is displayed in Current bandwidth. 2 Click to select the camera to set the bandwidth from the list box. 3 Click to select the desired bandwidth from the Setting bandwidth list box. 4 Type the Administrator name and Administrator password in each box. The factory settings of both items are "admin." 5 Click OK. If "Setting OK" is displayed, the bandwidth setting is completed. Others 94 Using the Supplied IP Setup Program