Home » Sony Manuals » Security Cameras » Sony SNC-RZ50N » Manual Viewer

Sony SNC-RZ50N User Guide - Page 65

Sending an Image via E- mail - e-Mail (SMTP) Menu, Common Tab - Setting the e-Mail (SMTP) Function

UPC - 027242240377

Add to My Manuals
Save this manual to your list of manuals

Page 65 highlights

Administrating the Camera Note You cannot set tours if the effective periods overlap each other. Stay time Type a period of time during which the camera is to stay at each preset position, between 1 and 3600 seconds. Speed Select the speed of camera movement between 1 and 23, or Fastest from the drop-down list. The camera moves faster with a higher number setting. The fastest speed is obtained with Fastest. Sequence Set the sequence of the tour. The preset positions saved using the Position tab are displayed in the drop-down list at the bottom. Select the preset position from the drop-down list, then click Add. The selected preset position is added in the Sequence list. Repeat this procedure to specify the preset positions in sequence. If you specified an unnecessary preset position, click to select it in the list and click then Delete. To change the order in the list, click to select the preset position and then click Up or Down. Note The tour cannot be set to On if no preset position is added in the Sequence list. OK/Cancel See "Buttons common to every menu" on page 31. Sending an Image via Email - e-Mail (SMTP) Menu When you click in the Administrator menu, the e-Mail (SMTP) menu appears. Using e-Mail (SMTP) function, you can send an e-mail with attached image file that has been shot linked with an external sensor input or with the built-in object detection function. The image file can also be sent periodically. The e-Mail (SMTP) menu consists of three tabs: Common, Alarm sending and Periodical sending. Common Tab - Setting the e-Mail (SMTP) Function e-Mail (SMTP) Select On when you use the e-Mail (SMTP) function. Notes • You cannot send an audio file by using the e-mail sending function. • The frame rate and operability on the main viewer may be reduced while a file is being transmitted by the e-Mail (SMTP) function. SMTP server name Type the SMTP server name using up to 64 characters, or the IP address of the SMTP server. Authentication Select the authentication required when you send an email. Off: Select if no authentication is required when an email is sent. 65 Sending an Image via E-mail - e-Mail (SMTP) Menu

Section	Page
Table of Contents	2
Overview	4
Features	4
Precautions	5
How to Use This User’s Guide	6
System Requirements	7
Preparation	8
Assigning the IP Address to the Camera	8
Assigning an IP address using the IP Setup Program	8
When using Windows XP Service Pack 2	10
When using Windows Vista	12
Accessing the Camera Using the Web Browser	15
Basic Configuration by the Administrator	17
Operating the Camera	18
Administrator and User	18
Logging in to Homepage - Welcome Page	19
Logging in as a user	19
Displaying the Administrator menu directly	20
About viewers	20
Configuration of Main Viewer	21
Main menu	22
Camera control section	22
Monitor image	23
Controlling the Monitor Image	24
Monitoring the camera image	24
Zooming in the monitor image	24
Capturing a Monitor Image	25
Capturing a monitor image	25
Saving the captured image	25
Operating the Camera	26
Controlling via the control panel	26
Panning and tilting by clicking the monitor image	26
Panning, tilting and zooming by specifying the area	26
Zooming an image by the camera zoom bar	27
Moving the camera to a preset position	27
Controlling the Camera on a Panorama Image	27
Facing the camera toward a specified point	27
Using the Trigger Button	28
Sending a monitor image via e-mail	28
Sending a monitor image to an FTP server	28
Recording a camera image as a still image	28
Controlling alarm output 1, 2	29
Controlling Day/Night function	29
Playing the audio file stored in the camera	29
Switching TCP/UDP Transmission Mode	30
Administrating the Camera	31
Basic Operations of Administrator Menu	31
How to setup the Administrator menu	31
Configuration of Administrator menu	32
Configuring the System - System Menu	33
System Tab	33
Date & time Tab	35
Initialize Tab	36
System log Tab	37
Access log Tab	37
Setting the Camera Image and Audio - Camera Menu	38
Common Tab	38
Picture Tab	39
Day/Night Tab	40
Video codec Tab	41
Streaming Tab	43
Configuring the Network - Network Menu	44
Network Tab	44
Wireless Tab - Setting of wireless connection	45
Dynamic IP address notification Tab - Notifying the IP Address	48
SSL Tab - Setting the SSL function	49
How to install the CA certificate	52
To remove the CA certificate which has been installed	53
Using the 802.1X Authentication Function - 802.1X Menu	54
System configuration of 802.1X network	54
Common Tab - Basic setting of 802.1X authentication function	54
Client certificate Tab	55
CA certificate Tab	57
Setting the 802.1X authentication function - Example of Windows Server 2003	57
Setting the User - User Menu	61
Setting the Security - Security Menu	62
Saving the Camera Position and Action - Preset position Menu	63
Position Tab - Saving pan/tilt/ zoom position	63
Tour Tab - Setting a tour	64
Sending an Image via E- mail - e-Mail (SMTP) Menu	65
Common Tab - Setting the e-Mail (SMTP) Function	65
Alarm sending Tab - Setting the e- mail sending mode when detecting the alarm	66
Periodical sending Tab - Setting the periodical e-mail sending mode	67
Sending Images to FTP Server - FTP client Menu	68
Common Tab - Setting the FTP client function	68
Alarm sending Tab - Setting the FTP client action when detecting the alarm	69
Periodical sending Tab - Setting the periodical FTP client activity	70
Recording Images in Memory - Image memory Menu	71
Common Tab - Setting the image memory function	72
Alarm recording Tab - Setting the Image memory function when detecting the alarm	73
Periodical recording Tab - Setting the periodical recording mode	74
Folder structure of image memory	74
Downloading Images from the Camera - FTP server Menu	75
Setting the Alarm Output - Alarm output Menu	76
Alarm out 1, 2 Tab	76
Outputting Audio Linked to Alarm Detection - Voice alert Menu	77
Voice alert 1, 2, 3 Tab	77
Setting the Operations from the Viewer - Trigger Menu	78
Setting the Schedule - Schedule Menu	80
Setting the Alarm Buffer - Alarm buffer Menu	81
Setting the Object Detection Function - Object detection Menu	82
What is unattended object detection?	82
Common Tab	84
Unattended object setting Tab	88
Configuration Tab	89
Transmitting with External Equipment Using the External Serial Terminal - Serial Menu	89
Using DDNS Service - DDNS setting Menu	91
Others	94
Using the Supplied IP Setup Program	94
Starting the IP Setup Program	94
Bandwidth control Tab	94
Date time Tab	95
Rebooting the Camera	95
Using the SNC audio upload tool - Transmitting Audio to Camera	96
Installing the SNC audio upload tool	96
Connecting the Camera to the Computer	96
Using the SNC audio upload tool	97
Using the SNC video player - Playing Video/ Audio File Recorded with Camera	101
Installing the SNC video player	101
Using the SNC video player	102
Using the SNC panorama creator - Creating a Panorama Image	103
Installing the SNC panorama creator	103
Using the SNC panorama creator	103
Creating and transmitting a panorama image	104
Saving a custom image to the camera	104
Using the SNC privacy masking tool - Masking a Camera Image	105
Installing the SNC privacy masking tool	105
Using the SNC privacy masking tool	106
Setting a privacy mask	107
Using the Custom Homepage Installer	108
Uploading the homepage to the camera using the Custom Homepage Installer	108
Assigning the IP Address to the Camera Using ARP Commands	111
Using the SNMP	112
1. Inquiry Commands	112
2. Setting Commands	112
When You Discard the Camera	113
Glossary	114

Match case Limit results 1 per page

Administrating the Camera

Sending an Image via E-mail — e-Mail (SMTP) Menu

Note

You cannot set tours if the effective periods overlap each

other.

Stay time

Type a period of time during which the camera is to stay

at each preset position, between

and

3600

seconds.

Speed

Select the speed of camera movement between

and

23,

Fastest

from the drop-down list. The camera moves

faster with a higher number setting. The fastest speed is

obtained with

Fastest

Sequence

Set the sequence of the tour.

The preset positions saved using the Position tab are

displayed in the drop-down list at the bottom.

Select the preset position from the drop-down list, then

click

Add

. The selected preset position is added in the

Sequence

list. Repeat this procedure to specify the

preset positions in sequence.

If you specified an unnecessary preset position, click to

select it in the list and click then

Delete

To change the order in the list, click to select the preset

position and then click

Down

Note

The tour cannot be set to

if no preset position is

added in the

Sequence

list.

OK/Cancel

See “Buttons common to every menu” on page 31.

Sending an Image via E-

mail

— e-Mail (SMTP)

When you click

in the Administrator menu,

the e-Mail (SMTP) menu appears.

Using e-Mail (SMTP) function, you can send an e-mail

with attached image file that has been shot linked with

an external sensor input or with the built-in object

detection function. The image file can also be sent

periodically.

The e-Mail (SMTP) menu consists of three tabs:

Common

Alarm sending

and

Periodical sending

Common Tab — Setting the e-Mail

(SMTP) Function

e-Mail (SMTP)

Select

when you use the e-Mail (SMTP) function.

Notes

•

You cannot send an audio file by using the e-mail

sending function.

•

The frame rate and operability on the main viewer

may be reduced while a file is being transmitted by the

e-Mail (SMTP) function.

SMTP server name

Type the SMTP server name using up to 64 characters,

or the IP address of the SMTP server.

Authentication

Select the authentication required when you send an e-

mail.

Off:

Select if no authentication is required when an e-

mail is sent.