Home » Sony Manuals » Security Cameras » Sony SNC-RZ50N » Manual Viewer

Sony SNC-RZ50N User Guide - Page 30

Switching TCP/UDP Transmission Mode - software for

UPC - 027242240377

Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

Switching TCP/UDP Transmission Mode You can select TCP or UDP as the communication port for the video/audio data. This function can be used when Mode (video codec mode) (page 41) is set to MPEG4 or H.264 and the ActiveX viewer is used. Notes • The function may not operate correctly when you use personal firewall software or antivirus software on your computer. In that case, disable the software or select the TCP mode. • If you are using Windows XP Service Pack 2 or Windows Vista, disable "Windows Firewall." For details, see "Configuring Windows Firewall" in "When using Windows XP Service Pack 2" on page 10 or "Configuring Windows Firewall" in "When using Windows Vista" on page 12. • When the SSL function is used, TCP/UDP transmission icon does not appear. UDP transmission cannot be selected whereas TCP transmission can be used. 1 Open the main viewer. 2 Click TCP/UDP Transmission. The Select TCP/UDP dialog appears. Transport Protocol) is adopted for video/audio communications. Since RTP is the protocol for running video/audio data, the video/audio playback is smoother than when TCP (HTTP) is selected. If a firewall is installed between the camera and the computer, or depending on the network environment, the video/audio may not play back properly when UDP (Unicast) is selected. In that case, select TCP. UDP (Multicast): This protocol is selectable when Multicast streaming (page 43) is On. When UDP (Multicast) is selected as the transmission port, RTP (Real-time Transport Protocol) and UDP multicast techniques are adopted for video/audio transmission. By selecting it, the network transmission load of the camera can be reduced. If a router that does not correspond to the multicast or a firewall is installed between the camera and the computer, the video/audio may not play back properly. In that case, select TCP or UDP (Unicast). 4 Click OK to close the dialog. If you do not change the transmission setting, click Cancel. Operating the Camera 3 Click one of the buttons TCP, UDP (Unicast) or UDP (Multicast). TCP: This is normally selected. When TCP is selected as the communication port, HTTP communication is adopted for video/audio communications. HTTP is the protocol used for reading the usual Web page. In an environment capable of reading Web pages, you can watch or listen to the video/audio by selecting the TCP port. UDP (Unicast): When UDP (Unicast) is selected as the communication port, RTP (Real-time 30 Switching TCP/UDP Transmission Mode

Section	Page
Table of Contents	2
Overview	4
Features	4
Precautions	5
How to Use This User’s Guide	6
System Requirements	7
Preparation	8
Assigning the IP Address to the Camera	8
Assigning an IP address using the IP Setup Program	8
When using Windows XP Service Pack 2	10
When using Windows Vista	12
Accessing the Camera Using the Web Browser	15
Basic Configuration by the Administrator	17
Operating the Camera	18
Administrator and User	18
Logging in to Homepage - Welcome Page	19
Logging in as a user	19
Displaying the Administrator menu directly	20
About viewers	20
Configuration of Main Viewer	21
Main menu	22
Camera control section	22
Monitor image	23
Controlling the Monitor Image	24
Monitoring the camera image	24
Zooming in the monitor image	24
Capturing a Monitor Image	25
Capturing a monitor image	25
Saving the captured image	25
Operating the Camera	26
Controlling via the control panel	26
Panning and tilting by clicking the monitor image	26
Panning, tilting and zooming by specifying the area	26
Zooming an image by the camera zoom bar	27
Moving the camera to a preset position	27
Controlling the Camera on a Panorama Image	27
Facing the camera toward a specified point	27
Using the Trigger Button	28
Sending a monitor image via e-mail	28
Sending a monitor image to an FTP server	28
Recording a camera image as a still image	28
Controlling alarm output 1, 2	29
Controlling Day/Night function	29
Playing the audio file stored in the camera	29
Switching TCP/UDP Transmission Mode	30
Administrating the Camera	31
Basic Operations of Administrator Menu	31
How to setup the Administrator menu	31
Configuration of Administrator menu	32
Configuring the System - System Menu	33
System Tab	33
Date & time Tab	35
Initialize Tab	36
System log Tab	37
Access log Tab	37
Setting the Camera Image and Audio - Camera Menu	38
Common Tab	38
Picture Tab	39
Day/Night Tab	40
Video codec Tab	41
Streaming Tab	43
Configuring the Network - Network Menu	44
Network Tab	44
Wireless Tab - Setting of wireless connection	45
Dynamic IP address notification Tab - Notifying the IP Address	48
SSL Tab - Setting the SSL function	49
How to install the CA certificate	52
To remove the CA certificate which has been installed	53
Using the 802.1X Authentication Function - 802.1X Menu	54
System configuration of 802.1X network	54
Common Tab - Basic setting of 802.1X authentication function	54
Client certificate Tab	55
CA certificate Tab	57
Setting the 802.1X authentication function - Example of Windows Server 2003	57
Setting the User - User Menu	61
Setting the Security - Security Menu	62
Saving the Camera Position and Action - Preset position Menu	63
Position Tab - Saving pan/tilt/ zoom position	63
Tour Tab - Setting a tour	64
Sending an Image via E- mail - e-Mail (SMTP) Menu	65
Common Tab - Setting the e-Mail (SMTP) Function	65
Alarm sending Tab - Setting the e- mail sending mode when detecting the alarm	66
Periodical sending Tab - Setting the periodical e-mail sending mode	67
Sending Images to FTP Server - FTP client Menu	68
Common Tab - Setting the FTP client function	68
Alarm sending Tab - Setting the FTP client action when detecting the alarm	69
Periodical sending Tab - Setting the periodical FTP client activity	70
Recording Images in Memory - Image memory Menu	71
Common Tab - Setting the image memory function	72
Alarm recording Tab - Setting the Image memory function when detecting the alarm	73
Periodical recording Tab - Setting the periodical recording mode	74
Folder structure of image memory	74
Downloading Images from the Camera - FTP server Menu	75
Setting the Alarm Output - Alarm output Menu	76
Alarm out 1, 2 Tab	76
Outputting Audio Linked to Alarm Detection - Voice alert Menu	77
Voice alert 1, 2, 3 Tab	77
Setting the Operations from the Viewer - Trigger Menu	78
Setting the Schedule - Schedule Menu	80
Setting the Alarm Buffer - Alarm buffer Menu	81
Setting the Object Detection Function - Object detection Menu	82
What is unattended object detection?	82
Common Tab	84
Unattended object setting Tab	88
Configuration Tab	89
Transmitting with External Equipment Using the External Serial Terminal - Serial Menu	89
Using DDNS Service - DDNS setting Menu	91
Others	94
Using the Supplied IP Setup Program	94
Starting the IP Setup Program	94
Bandwidth control Tab	94
Date time Tab	95
Rebooting the Camera	95
Using the SNC audio upload tool - Transmitting Audio to Camera	96
Installing the SNC audio upload tool	96
Connecting the Camera to the Computer	96
Using the SNC audio upload tool	97
Using the SNC video player - Playing Video/ Audio File Recorded with Camera	101
Installing the SNC video player	101
Using the SNC video player	102
Using the SNC panorama creator - Creating a Panorama Image	103
Installing the SNC panorama creator	103
Using the SNC panorama creator	103
Creating and transmitting a panorama image	104
Saving a custom image to the camera	104
Using the SNC privacy masking tool - Masking a Camera Image	105
Installing the SNC privacy masking tool	105
Using the SNC privacy masking tool	106
Setting a privacy mask	107
Using the Custom Homepage Installer	108
Uploading the homepage to the camera using the Custom Homepage Installer	108
Assigning the IP Address to the Camera Using ARP Commands	111
Using the SNMP	112
1. Inquiry Commands	112
2. Setting Commands	112
When You Discard the Camera	113
Glossary	114

Match case Limit results 1 per page

Operating the Camera

Switching TCP/UDP Transmission Mode

Switching TCP/UDP

Transmission Mode

You can select TCP or UDP as the communication port

for the video/audio data.

This function can be used when

Mode

(video codec

mode) (page 41) is set to

MPEG4

H.264

and the

ActiveX viewer is used.

Notes

•

The function may not operate correctly when you use

personal firewall software or antivirus software on

your computer.

In that case, disable the software or

select the TCP mode.

•

If you are using Windows XP Service Pack 2 or

Windows Vista, disable “Windows Firewall.” For

details, see “Configuring Windows Firewall” in

“When using Windows XP Service Pack 2” on

page 10 or “Configuring Windows Firewall” in

“When using Windows Vista” on page 12.

•

When the SSL function is used, TCP/UDP

transmission icon does not appear. UDP transmission

cannot be selected whereas TCP transmission can be

used.

Open the main viewer.

Click

TCP/UDP Transmission

The

Select TCP/UDP

dialog appears.

Click one of the buttons

TCP, UDP (Unicast)

UDP (Multicast)

TCP:

This is normally selected.

When

TCP

is selected as the communication port,

HTTP communication is adopted for video/audio

communications.

HTTP is the protocol used for reading the usual

Web page.

In an environment capable of reading Web pages,

you can watch or listen to the video/audio by

selecting

the TCP port.

UDP (Unicast):

When

UDP (Unicast)

is selected

as the communication port, RTP (Real-time

Transport Protocol) is adopted for video/audio

communications. Since RTP is the protocol for

running video/audio data, the video/audio playback

smoother than when TCP (HTTP) is selected. If

a firewall is installed between the camera and the

computer, or depending on the network

environment, the video/audio may not play back

properly when

UDP (Unicast)

is selected. In that

case, select

TCP

UDP (Multicast):

This protocol is selectable when

Multicast streaming

(page 43) is

. When

UDP

(Multicast)

is selected as the transmission port,

RTP (Real-time Transport Protocol) and UDP

multicast techniques are adopted for video/audio

transmission. By selecting it, the network

transmission load of the camera can be reduced. If

a router that does not correspond to the multicast or

a firewall is installed between the camera and the

computer, the video/audio may not play back

properly. In that case, select

TCP

UDP

(Unicast)

Click

to close the dialog.

If you do not change the transmission setting, click

Cancel