Sony STR-DN840 Operating Instructions (Large File - 14.22 MB) - Page 103

Using the Remote Control Using the Remote Control Reassigning the input button You can change the default settings of the input buttons to suit the equipment in your system. For example, if you connect a Bluray Disc player to the SAT/CATV jack on the receiver, you can set the SAT/CATV button on this remote control to control the Blu-ray Disc player. Note You cannot reassign the TV, TUNER, BLUETOOTH, USB, HOME NETWORK, SEN input buttons. TV ?/1 Numeric buttons Input buttons 1 While holding down the input button of which you want to change the assignment, hold down TV ?/1. Example: While holding down SAT/CATV, hold down TV ?/1. 2 With the TV ?/1 button held, release the input button. Example: With the TV ?/1 button held, release SAT/CATV. 3 Referring to the following table, press the corresponding button for the category you want, then release TV ?/1. Example: Press 1, then release TV ?/1. Now you can use the SAT/CATV button to control the Blu-ray Disc player. Categories Press Blu-ray Disc player 1 (command mode BD1)a) Blu-ray Disc recorder 2 (command mode BD3)a) DVD player 3 (command mode DVD1) DVD recorder 4 (command mode DVD3)b) VCR 5 (command mode VTR3)c) CD player 6 a)For details on the BD1 or BD3 setting, refer to the operating instructions supplied with the Blu-ray Disc player or Blu-ray Disc recorder. b)Sony DVD recorders are operated with a DVD1 or DVD3 setting. For details, refer to the operating instructions supplied with the DVD recorders. c)Sony VCRs are operated with a VTR 3 setting which corresponds to VHS. 103US