Sony STR-DN840 Operating Instructions (Large File - 14.22 MB) - Page 119
Specifications, USA model only - watts per channel
View all Sony STR-DN840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Additional Information Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (USA model only) With 6 ohm loads, both channels driven, from 20 - 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output. Amplifier section Minimum RMS Output Power1) (6 ohms, 20 Hz - 20 kHz, THD 0.09%) 95 W + 95 W Stereo Mode Output Power1) (6 ohms, 1 kHz, THD 1%) 110 W + 110 W Surround Mode Output Power1) 2) (6 ohms, 1 kHz, THD 0.9%) 150 W per channel 1) Measured under the following conditions: Power requirements: 120 V AC, 60 Hz. 2) Reference power output for front, center, surround, surround back and front high speakers. Depending on the sound field settings and the source, there may be no sound output. Frequency response Analog 10 Hz - 100 kHz, +0.5/-2 dB (with sound field and equalizer bypassed) Input Analog Sensitivity: 500 mV/50 kilohms S/N3): 105 dB (A, 500 mV4)) Digital (Coaxial) Impedance: 75 ohms S/N: 100 dB (A, 20 kHz LPF) Digital (Optical) S/N: 100 dB (A, 20 kHz LPF) Output (Analog) SUBWOOFER Voltage: 2 V/1 kilohm Equalizer Gain levels ±10 dB, 1 dB step 3) INPUT SHORT (with sound field and equalizer bypassed). 4) Weighted network, input level. FM tuner section Tuning range 87.5 MHz - 108.0 MHz (100 kHz step) Antenna (aerial) FM wire antenna (aerial) Antenna (aerial) terminals 75 ohms, unbalanced AM tuner section Tuning range 530 kHz - 1,710 kHz (10 kHz step) 531 kHz - 1,710 kHz (9 kHz step) Antenna (aerial) Loop antenna (aerial) Video section Inputs/Outputs Video: 1 Vp-p, 75 ohms 119US