Sony STR-DN840 Operating Instructions (Large File - 14.22 MB) - Page 23
Bi-amplifier connection - speaker pattern
View all Sony STR-DN840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Connections * When you connect a subwoofer with an auto standby function, turn off the function when watching movies. If the auto standby function is set to on, it turns to standby mode automatically based on the level of the input signal to the subwoofer, and the sound may not be output. ** Notes on the SPEAKERS SURROUND BACK/ BI-AMP/ FRONT HIGH/ FRONT B terminals connection. - If you connect only one surround back speaker, connect it to L of this terminals. - If you have an additional front speaker system, connect them to this terminals. Set the "SB Assign" to "Speaker B" in the Speaker Settings menu (page 90). You can select the front speaker system you want by using the SPEAKERS button on the receiver (page 35). - You can connect the front speakers to this terminals using bi-amplifier connection (page 23). Set the "SB Assign" to "Bi-Amp" in the Speaker Settings menu (page 90). Note After you have installed and connected your speaker, be sure to select the speaker pattern from the Speaker Settings menu (page 88). Bi-amplifier connection If you are not using surround back speakers and front high speakers, you can connect the front speakers to the SPEAKERS SURROUND BACK/ BI-AMP/ FRONT HIGH/ FRONT B terminals using a biamplifier connection. Front speaker (Right) Front speaker (Left) Connect the jacks on the Lo (or Hi) side of the front speakers to the SPEAKERS FRONT A terminals, and connect the jacks on the Hi (or Lo) side of the front speakers to the SPEAKERS SURROUND BACK/ BI-AMP/ FRONT HIGH/ FRONT B terminals. Make sure that metal fittings of Hi/Lo attached to the speakers have been removed from the speakers to avoid receiver malfunction. After you have made the bi-amplifier connection, set the "SB Assign" to "BiAmp" in the Speaker Settings menu (page 90). 23US