Sony STR-DN840 Operating Instructions (Large File - 14.22 MB) - Page 109
Additional Information, Audio Out to AMP in the HDMI - hdcp 2 2
View all Sony STR-DN840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Additional Information • Sound may not be output from the receiver while the OSD appears on the TV screen. Press HOME to display the home menu, then press HOME again. • Audio signals (format, sampling frequency, bit length, etc.) transmitted from an HDMI jack may be suppressed by the connected equipment. Check the setup of the connected equipment if the image is poor or the sound does not come out of the equipment connected via the HDMI cable. • When the connected equipment is not compatible with copyright protection technology (HDCP), the image and/or the sound from the HDMI TV OUT jack may be distorted or may not be output. If this is the case, check the specification of the connected equipment. • Set the image resolution of the playback equipment to more than 720p/1080i to enjoy High Bitrate Audio (DTS-HD Master Audio, Dolby TrueHD). • The image resolution of the playback equipment may need to be at certain settings before you can enjoy DSD and Multi Channel Linear PCM. Refer to the operating instructions of the playback equipment. • Make sure the TV is compatible with the System Audio Control function. • If the TV does not have System Audio Control function, set the "HDMI Audio Out" settings in HDMI Settings menu to - "TV+AMP" if you want to listen to the sound from the TV speaker and receiver. - "AMP" if you want to listen to the sound from the receiver. • When you connect the receiver to a video equipment (projector, etc.), sound may not be output from the receiver. In this case, set the "HDMI Audio Out" to "AMP" in the HDMI Settings menu (page 94). • If you cannot listen to the sound of the equipment connected to the receiver while TV input is selected on the receiver - Be sure to change the input of the receiver to HDMI when you want to watch a program on the equipment connected via HDMI connection to the receiver. - Change the TV channel when you want to watch a TV broadcast. - Be sure to select the correct equipment or input you want when you watch a program from the equipment connected to the TV. Refer to the operating instructions of the TV on this operation. • When "Analog Direct" is being used, the sound is not output. Use other sound field (page 51). • When using the Control for HDMI function, you cannot control the connected equipment using TV's remote control. - Depending on the connected equipment and TV, you may need to set up the equipment and TV. Refer to the operating instructions supplied with each equipment and TV. - Change the input of the receiver to the HDMI input connected to the equipment. • Check that the selected digital audio input jack is not reassigned to other inputs (page 83). The left and right sounds are unbalanced or reversed. • Check that the speakers and equipment are connected correctly and securely. • Adjust the sound level parameters using the Speaker Settings menu. 109US