Sony STR-DN840 Operating Instructions (Large File - 14.22 MB) - Page 77
Playing music of a, device - bluetooth
View all Sony STR-DN840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
To cancel pairing operation Hold down BLUETOOTH after step 3. "CANCEL" appears on the display panel. Playing music of a Bluetooth device You can operate a Bluetooth device by connecting the receiver and a Bluetooth device using AVRCP. Check the following before playing music: - The Bluetooth function of the Bluetooth device is turned on. - Pairing has been completed. 1 Press BLUETOOTH to select Bluetooth function. The receiver automatically connects to the last connected Bluetooth device. If you cannot connect with a last connected Bluetooth device, press BLUETOOTH on the receiver. Once the connection is established, proceed to step 3. 2 Establish a connection from the Bluetooth device. For details, refer to the operating instructions of your Bluetooth device. 3 Start playback from the Bluetooth device. You can also press N on the remote control. 4 Adjust the volume. Press 2 +/- (or turn the MASTER VOLUME knob on the receiver). Note Depending on the type of Bluetooth device, you can adjust the volume using the controls of the Bluetooth device. Notes • Once the connection is established, the device name appears on the TV screen and "BT" lights up on the display panel. • To disconnect from a Bluetooth device, press BLUETOOTH on the receiver. You can also disconnect from your Bluetooth device. For details, refer to the operating instructions of your Bluetooth device. • While connected to a Bluetooth device, this receiver cannot be detected and a connection cannot be established from another Bluetooth device. • If you cannot connect with a paired Bluetooth device, perform the pairing operation between the receiver and the Bluetooth device again. • If the input has been set to "BLUETOOTH" when you turn on the receiver, the receiver automatically connects to the last connected Bluetooth device. To operate the Bluetooth device using the remote control m/M N ./> X x Press N* X x m/M ./> Operation Starts play. Pauses play. Stops play. Fast reverses or forwards. Goes to the previous/next file. * If no Bluetooth device is connected and you press N, the receiver automatically connects to the last connected Bluetooth device and play back the music. Note These operations may not be available for certain Bluetooth devices. In addition, the actual operations may differ depending on the connected Bluetooth device. Using Bluetooth Features 77US