Sony STR-DN840 Operating Instructions (Large File - 14.22 MB) - Page 106
Troubleshooting, Power, Image - protector
View all Sony STR-DN840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
• Sony cannot be held liable in any way for damages or other loss resulting from information leaks during communication using Bluetooth technology. • Bluetooth communication is not necessarily guaranteed with all Bluetooth devices that have the same profile as this receiver. • Bluetooth devices connected with this receiver must comply with the Bluetooth specification prescribed by the Bluetooth SIG, Inc., and must be certified to comply. However, even when a device complies with the Bluetooth specification, there may be cases where the characteristics or specifications of the Bluetooth device make it impossible to connect, or may result in different control methods, display or operation. • Noise may occur or the audio may cut off depending on the Bluetooth device connected with this receiver, the communications environment, or surrounding conditions. If you have any questions or problems concerning your receiver, please consult your nearest Sony dealer. Troubleshooting If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. Note that if service personnel changes some parts during repair, these parts may be retained. Power The receiver is turned off automatically. • "Auto Standby" is set to "On" (page 97). • The Sleep Timer function is working (page 15). • "PROTECTOR" is working (page 118). The ?/1 (on/standby) indicator flashes in quick succession. • The software update has error. Unplug the power cord, and then plug in the power cord again. The receiver will try to update the software. If the indicator continues to flash in quick succession, contact your nearest Sony dealer. Image No image appears on the TV. • Select the appropriate input using the input buttons. • Set your TV to the appropriate input mode. • Move your audio equipment away from the TV. • Make sure that cables are correctly and securely connected to equipment. 106US