Sony STR-DN840 Operating Instructions (Large File - 14.22 MB) - Page 49
Tuning to a station, automatically Auto, Tuning, directly Direct Tuning, Tuner Operations
View all Sony STR-DN840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Tuner Operations 1 Frequency indication (page 49) 2 Preset station list (page 50) Numeric buttons D.TUNING V/v/b, OPTIONS HOME SHIFT 1 Select "Listen" from the home menu, then press . 2 Select "FM" or "AM" from the menu, then press . The FM or AM menu list appears on the TV screen. FM/AM screen You can select and operate each item on the screen by pressing V/v/B/b and . Tuning to a station automatically (Auto Tuning) Select "Tuning +" or "Tuning -", then press . Select "Tuning +" to scan from lower to higher frequency stations, select "Tuning -" to scan from higher to lower stations. The receiver stops scanning whenever a station is received. In case of poor FM stereo reception 1 Tune in the station you want to listen to using Auto Tuning, Direct Tuning (page 49), or select the preset station you want (page 50). 2 Press OPTIONS. 3 Select "FM Mode", then press . 4 Select "Mono", then press . Tuning to a station directly (Direct Tuning) You can enter the frequency of a station directly by using the numeric buttons. 1 Press D.TUNING. 2 Hold down SHIFT, then press the numeric buttons to enter the frequency, then press . Example 1: FM 102.50 MHz Select 1 b 0 b 2 b 5 Example 2: AM 1,350 kHz Select 1 b 3 b 5 b 0 Tip Adjust the direction of the AM loop antenna (aerial) for optimum reception upon tuning to an AM station. 49US