Sony STR-DN840 Operating Instructions (Large File - 14.22 MB) - Page 108
Deep Color Deep Colour, 4K or 3D, Audio Out to TV+AMP in - subwoofer noise
View all Sony STR-DN840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
• When you want to listen to the sound from the TV speaker, set the "HDMI Audio Out" to "TV+AMP" in the HDMI Settings menu (page 94). If you cannot play back multi channel audio source, set to "AMP". However, the sound will not output through the TV speaker. • Sound may be interrupted when the sampling frequency, the number of channels or audio format of audio output signals from the playback equipment is switched. There is severe hum or noise. • Check that the speakers and equipment are connected securely. • Check that the connecting cords are away from a transformer or motor, and at least 3 meters (10 feet) away from a TV set or fluorescent light. • Move your audio equipment away from the TV. • The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol. There is no sound, or only a very lowlevel sound is heard from specific speakers. • Connect a pair of headphones to the PHONES jack to verify that sound is output from the headphones. If only one channel is output from the headphones, the equipment may not be connected to the receiver correctly. Check that all the cords are fully inserted into the jacks on both the receiver and the equipment. If both channels are output from the headphones, the front speaker may not be connected to the receiver correctly. Check the connection of the front speaker which is not outputting any sound. • Make sure you have connected to both the L and R jacks of an analog equipment, analog equipment requires both L and R jack connections. Use an audio cord (not supplied). • Adjust the speaker level (page 90). • Check that the speaker settings are appropriate for the setup using the Auto Calibration menu or "Speaker Pattern" in the Speaker Settings menu. Then check that sound is output from each speaker correctly, using "Test Tone" in the Speaker Settings menu. • Some discs have no Dolby Digital Surround EX information. • Check that the subwoofer is connected correctly and securely. • Make sure you have turned on your subwoofer. • Depending on the selected sound field, no sound will be available from the subwoofer. • When all speakers are set to "Large" and "Neo:6 Cinema" or "Neo:6 Music" is selected, there is no sound from the subwoofer. There is no sound from a specific equipment. • Check that the equipment is connected correctly to the audio input jacks for that equipment. • Check that the cord(s) used for the connection is (are) fully inserted into the jacks on both the receiver and the equipment. • Check the INPUT MODE (page 83). • Check that the equipment is connected correctly to the HDMI jack for that equipment. • Depending on the playback equipment, you may need to set up the HDMI setting of the equipment. Refer to the operating instructions supplied with each equipment. • Be sure to use a High Speed HDMI cable when you view images or listen to sound, especially for the 1080p, Deep Color (Deep Colour), 4K or 3D transmission. 108US