Sony STR-DN840 Operating Instructions (Large File - 14.22 MB) - Page 121
Additional Information, NETWORK General, WPA2-PSK AES, WPA/WPA2
View all Sony STR-DN840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Additional Information NETWORK section Ethernet LAN 10BASE-T/100BASE-TX Wireless LAN Compatible standards: IEEE 802.11 b/g Security: WEP 64 bit, WEP 128 bit, WPA/ WPA2-PSK (AES), WPA/WPA2PSK (TKIP) Radio frequency: 2.4 GHz Bluetooth section Communication system Bluetooth Specification version 3.0 Output Bluetooth Specification Power Class 2 Maximum communication range Line of sight approx. 10 m1) Frequency band 2.4 GHz band (2.4000 GHz - 2.4835 GHz) Modulation method FHSS (Freq Hopping Spread Spectrum) Compatible Bluetooth profiles2) A2DP (Advanced Audio Distribution Profile) AVRCP 1.3 (Audio Video Remote Control Profile) Supported Codecs3) SBC4), AAC Transmission range (A2DP) 20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz) 1) The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antenna's performance, operating system, software application, etc. 2) Bluetooth standard profiles indicate the purpose of Bluetooth communication between devices. 3) Codec: Audio signal compression and conversion format 4) Subband Codec General Power requirements 120 V AC, 60 Hz Power consumption 240 W Power consumption (during standby mode) 0.3 W (When "Control for HDMI", "Pass Through", "Network Standby", and "BT Standby" are set to "Off".) Dimensions (width/height/depth) (Approx.) 430 mm × 156 mm × 329.4 mm (17 in × 6 1/4 in × 13 in) including projecting parts and controls Mass (Approx.) 8.5 kg (18 lb 9 oz) Design and specifications are subject to change without notice. 121US