Sony STR-DN840 Operating Instructions (Large File - 14.22 MB) - Page 76
Listening to music of a Bluetooth device, Pairing the receiver, with a, device
View all Sony STR-DN840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Listening to music of a Bluetooth device You can play music of a Bluetooth device via this receiver after pair and connect the Bluetooth device with the receiver. Pairing the receiver with a Bluetooth device Pairing is an operation where Bluetooth devices register with each other beforehand. Use the procedure below to pair the receiver with your Bluetooth device. Once a pairing operation is performed, it does not need to be performed again. If pairing is already completed, proceed to "Playing music of a Bluetooth device" (page 77). BLUETOOTH 1 Place the Bluetooth device within 1 meter (3.3 feet) from this receiver. 2 Press BLUETOOTH to select Bluetooth function. 3 Hold down BLUETOOTH for 2 seconds to activate the pairing mode of the receiver. "Pairing ready" appears and "BT" flashes quickly on the display panel. Perform step 4 within 5 minutes, otherwise pairing will be canceled. In this case, repeat this step. 4 Perform pairing on the Bluetooth device to detect this receiver. For details, refer to the operating instructions of your Bluetooth device. A list of detected devices may appears on the Bluetooth device display depending on the type of Bluetooth device. This receiver is displayed as "STR-DN840". Note When establishing a connection with this receiver, select the audio profile (A2DP, AVRCP) at the Bluetooth device. If the Bluetooth device does not support the AVRCP profile, you cannot perform playback or other operations with this receiver (page 75). 5 Select "STR-DN840" on the Bluetooth device display. If "STR-DN840" is not displayed, repeat from step 1. 6 If passkey* is required on the display of the Bluetooth device, enter "0000". 7 Once pairing is completed, connect this receiver with the Bluetooth device. Depending on the device, connection is automatically made along with the pairing. Once the connection is established, the device name appears and "BT" lights up on the display panel. * Passkey may be called "Passcode", "PIN code", "PIN number" or "Password". Notes • The receiver only supports numerical passkey up to 4 digits. • You can pair up to 9 Bluetooth devices with this receiver. If 10th Bluetooth device is paired, the least recently connected device will be replaced by the new one. • To pair with other Bluetooth devices, repeats steps 1 to 6. 76US