Sony STR-DN840 Operating Instructions (Large File - 14.22 MB) - Page 104
Resetting the input buttons, Additional Information, Precautions
View all Sony STR-DN840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Resetting the input buttons TV INPUT TV ?/1 ?/1 2 - 1 While holding down 2 -, press and hold ?/1, then press TV INPUT. 2 Release all buttons. The input buttons are reset to the default settings. Additional Information Precautions On safety Should any solid object or liquid fall into the cabinet, unplug the receiver and have it checked by qualified personnel before operating it any further. On power sources • Before operating the receiver, check that the operating voltage is identical with your local power supply. The operating voltage is indicated on the nameplate on the back of the receiver. • The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. • If you are not going to use the receiver for a long time, be sure to disconnect the receiver from the wall outlet. To disconnect the AC power cord (mains lead), grasp the plug itself; never pull the cord. • (USA and Canada models only) One blade of the plug is wider than the other for the purpose of safety and will fit into the wall outlet only one way. If you are unable to insert the plug fully into the outlet, contact your dealer. • The AC power cord (mains lead) must be changed only at a qualified service shop. On heat buildup Although the receiver heats up during operation, this is not a malfunction. If you continuously use this receiver at a large volume, the cabinet temperature of the top, side and bottom rises considerably. To avoid burning yourself, do not touch the cabinet. 104US