3Com 4800G Getting Started Guide - Page 58
Changing the Boot Mode, seconds, once the remaining waiting time becomes zero, the system begins - password recovery
UPC - 662705534183
View all 3Com 4800G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
58 CHAPTER 4: INITIAL POWER-ON Table 15 Description on the fields Field BOOT MENU Download application file to flash Select application file to boot Display all files in flash Delete file from flash Modify bootrom password Enter bootrom upgrade menu Skip current configuration file Set bootrom password recovery Set switch startup mode Reboot Enter your choice(0-9): Description Boot menu Download the application files to the flash Select application files for switch booting Display all files in the flash Delete files from the flash Modify the password of Boot ROM Enter BootROM upgrade menu Skip current configuration files Restore the Boot ROM password Set the startup mode of the switch Reboot the switch Select your choice 0 to 9 ■ If you perform no operation or press a key other than Ctrl + B within two seconds, once the remaining waiting time becomes zero, the system begins to automatically start up and the following information is displayed: Auto-booting... Decompress Image...OK! Starting at 0x80100000... User interface aux0 is available. Press ENTER to get started. Changing the Boot Mode By default, the system starts up in fast boot mode. If you want to change the boot mode to normal, press Ctrl + B within two seconds to enter the Boot Menu showed below: BOOT MENU 1. Download application file to flash 2. Select application file to boot 3. Display all files in flash 4. Delete file from flash 5. Modify bootrom password 6. Enter bootrom upgrade menu 7. Skip current configuration file 8. Set bootrom password recovery 9. Set switch startup mode 0. Reboot Enter your choice(0-9):