3Com 4800G Getting Started Guide - Page 63
Enter, Properties, Select an appropriate download baud rate. For example, if you select - console settings
UPC - 662705534183
View all 3Com 4800G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Local Software Loading 63 2. Set FTP protocol parameter 3. Set XMODEM protocol parameter 0. Return to boot menu Enter your choice(0-3): 2 Select 3 in the above menu to load the Boot ROM and host software using XModem protocol. The system displays the following download baud rate setting menu: Please select your download baudrate: 1.* 9600 2. 19200 3. 38400 4. 57600 5. 115200 0. Return Enter your choice (0-5): 3 Select an appropriate download baud rate. For example, if you select 5, the 115200 bps rate is chosen, and the system displays the following information: Download baudrate is 115200 bps Please change the terminal's baudrate to 115200 bps and select XMODE M protocol Press enter key when ready Press Enter after the information above shows that the baud rate has been changed. n If you have chosen 9,600 bps, you do not need to modify the HyperTerminal's baud rate, and therefore you can skip Step 4 and 5 below and proceed to Step 6 directly. In this case, the system will not display the above information. 4 Select File > Properties in HyperTerminal, click Configure... in the popup dialog box, select the bits per second of 115,200 in the console port configuration dialog box.