Brother International MFC-820CW Network Users Manual - English - Page 116
blank, check that the access point and the machine, are powered on, and then click
View all Brother International MFC-820CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Wireless installation for Macintosh® Item Record the current wireless computer settings Communication mode: (Infrastructure/Ad-hoc) 9 Channel: (1-14) Network name (SSID/ESSID) Authentication method (Open system/Shared key) Encryption: (None/WEP/Other) Encryption key: 13 To communicate with the un-configured wireless machine, temporarily change the wireless settings on your Macintosh® to match machine's default settings shown on this screen. Click Next. 14 If more than one wireless machine is available on the network, the following list appears. If the list is blank, check that the access point and the machine are powered on, and then click Refresh. Choose the machine you wish to configure, and click Next. Note The Default Node name of the NC-xxxx (where "xxxx" is your model name) is "BRW_xxxxxx" or "BRN_xxxxxx" (where "xxxxxx" is the last six digits of Ethernet address). 9 - 6