Brother International MFC-820CW Network Users Manual - English - Page 89
button, Name SSID, Channel, Refresh, not choose this SSID.
View all Brother International MFC-820CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Wireless installation for Windows® Note The Default Node name of the NC-xxxx (where "xxxx" is your model name) is "BRW_xxxxxx" or "BRN_xxxxxx" (where "xxxxxx" is the last six digits of Ethernet address). 13 The wizard will search for wireless networks 8 available from your machine. If more than one wireless network is available, the following list appears. Choose the access point you wish to associate the machine with, and then click Next. Note • If your target access point does not appear on the list, you can manually add it by clicking the Add button. Follow the on-screen instructions for entering the Name (SSID) and the Channel number. • "SETUP" is the default SSID of the machine. Do not choose this SSID. • If the list is blank, check that the access point has power, and then see if the machine and the access point are within range for wireless communication. Then, click Refresh. 14 If your network is not configured for Authentication and Encryption, the following screen will appear. To continue installation, click OK and go to step 16. 8 - 18