Brother International MFC-820CW Network Users Manual - English - Page 158
IP Address, APIPA, Subnet Mask, The factory setting for, may be changed by the, setting.
View all Brother International MFC-820CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Appendix B Level Level two Level three one Options 1 Options 2 Factory settings 5.LAN 3.Setup 1.Setup Wizard Searching SSID Select SSID & Set - WLAN (Select SSID from list or manually add SSID) 2.SecurEasySetup Connecting WLAN/ - B - Connected/ Connection Error 4.WLAN 1.Status Active(802.11b)/ - - Status Active(802.11g)/ Disabled/ Searching SSID 2.Signal Strong/ Medium/ - - Weak/ None 3.SSID (Shows SSID with - - less than 33 digits) 4.Comm.Mode Ad-hoc/ - - Infrastructure 5.Security Mode WEP/ WPA-PSK/ None KEY1/ KEY2/ KEY3/ KEY4 (when WEP - is selected) 5.Setup Misc. 1.Wired LAN Auto/ 100B-FD/ - 100B-HD/ 10B-FD/ 10B-HD Auto 2.Time Zone GMTXXX:XX - GMT-00:00 6.Network Wired LAN I/F Reboot OK? Accepted 1.Yes/ 2.No - Wired LAN WLAN Reboot OK? 1.Yes/ 2.No Accepted - 0.Factory 1.Reset 1.Yes - - Reset 2.No - - 2.Exit - - - 1. The factory setting for IP Address may be changed by the APIPA setting. 2. The factory setting for Subnet Mask may be changed by the APIPA setting. B - 5