Canon PIXMA MX922 Troubleshooting Guide - Page 75
or in the ADF.
View all Canon PIXMA MX922 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
• Check 5: When using paper with one printable surface, make sure that the paper is loaded with the printable side facing down. Load paper with the printable side facing down. Refer to the instruction manual supplied with the paper for detailed information on the printable side. • When copying, see also the sections below: • Check 6: Is the platen glass or the glass of ADF dirty? Clean the platen glass or the glass of ADF. Cleaning the Platen Glass and Document Cover Note If the glass of ADF is dirty, black streaks appear on the paper as shown below. • Check 7: Check that the original is loaded correctly on the platen glass or in the ADF. Loading Originals • Check 8: Is the original document is loaded with the proper side facing up/down? When loading the original on the platen glass, the side to be copied should be face down. When loading the original in the ADF, the side to be copied should be face up. • Check 9: Did you copy a printout done by this machine? If you use a printout done by this machine as the original, print quality may be reduced depending on the condition of the original. Print from the machine directly, or reprint from the computer.