Canon S830D S830D Quick Start Guide - Page 10

Basic Printing Loading Media into the S830D Follow these instructions and tips for loading media into the printer. • To prevent paper jams, always fan the sheets and align the edges before you load them into the printer. • Handle media carefully by its edges. • Never touch the print surface (the glossy or brighter white side of the sheets). • Dirt or fingerprints on the print surface will adversely affect print quality. • To prevent changes in color, never stack printed sheets after they have been printed. • Cover printed sheets with one sheet of plain paper to protect the printed surface, even if you intend to store them in clear plastic folders. For more information on loading media, see the S830D User's Guide on the Setup Software & User's Guide CD-ROM. To load plain paper or other Canon media: 1. Make sure the paper thickness lever is set correctly for the media used. Print side 2. Pinch and slide the paper guide completely to the left. 3. Fan the edges of the sheets to remove static cling, then tap the edges of the stack against a flat surface so the stack is aligned. 4. Insert the media into the paper rest, with the print side facing up. Load limit mark Some specialty media have specific sides for printing. The print side is usually the brighter white or glossier side of the page. When using specialty media, ensure that the brighter/glossier side faces up and avoid touching the print side. Also, note the load limit for the media you are using and do not exceed the limit. Always follow the specific media instructions packaged with your media for complete details and ink drying times. 5. Slide the paper guide right to the edge of the media until firmly in place. 6