Canon S830D S830D Quick Start Guide - Page 68
S830D User's, Guide - blinking power light
View all Canon S830D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Troubleshooting Problem Printer is not responding Possible Cause Try This Power cable is not securely connected Verify that the power cable is securely connected to the printer and plugged into a working outlet. Printer is not turned on or is not ready Verify that the POWER lamp is on and glowing a steady green. If the light is off, press the POWER button. The green light will blink as the printer is warming up, then go to a steady (no blink) state when the printer is ready. If the POWER lamp is blinking green, this indicates that the printer is warming up or is processing a print job. If the POWER lamp blinks orange, or green and orange alternately, see "Handling Error Messages" on page 66. Computer/printer needs to be reset Reboot the computer and/or reset the printer. • To reboot, close all open applications, then restart the computer. • To reset the printer, turn it off, then back on. Printer and computer cabled together incorrectly Reconnect the printer cable to the correct port, with the correct cable. See the "Easy Setup Instructions" in the S830D User's Guide on the Setup Software & User's Guide CD-ROM. Ensure that the USB cable is connected directly to the computer, bypassing any USB hubs. Bad cable Replace the printer cable. 64