Cisco NME-16ES-1G User Guide - Page 165

16- and 36-Port Ethernet Switch Module for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series debug dot1x debug dot1x To enable debugging of the 802.1x feature, use the debug dot1x command in privileged EXEC mode. To disable debugging output, use the no form of this command. debug dot1x {all | authsm | backend | besm | core | reauthsm} no debug dot1x {all | authsm | backend | besm | core | reauthsm} Syntax Description all authsm backend besm core reauthsm Enables debugging of all conditions. Enables debugging of the authenticator state machine, which is responsible for controlling access to the network through 802.1x-enabled ports. Enables debugging of the interaction between the 802.1x process and the switch (Remote Authentication Dial-In User Service [RADIUS] client). Enables debugging of the backend state machine, which is responsible for relaying authentication request between the client and the authentication server. Enables debugging of the 802.1x process, which includes 802.1x initialization, configuration, and the interaction with the port manager module. Enables debugging of the reauthentication state machine, which manages periodic reauthentication of the client. Defaults Debugging is disabled. Command Modes Privileged EXEC Command History Release 12.1(6)EA2 12.2(15)ZJ Modification This command was introduced. This command was implemented on the following platforms: Cisco 2600 series, Cisco 3600 series, and Cisco 3700 series routers. Usage Guidelines The undebug dot1x command is the same as the no debug dot1x command. Related Commands Command show debugging show dot1x Description Displays information about the types of debugging that are enabled. Displays 802.1x statistics, administrative status, and operational status for the switch or for the specified interface. Cisco IOS Release 12.2(2)XT, 12.2(8)T, and 12.2(15)ZJ 165