Cisco NME-16ES-1G User Guide - Page 214

show class-map 16- and 36-Port Ethernet Switch Module for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series show class-map To display quality of service (QoS) class maps, which define the match criteria to classify traffic, use the show class-map command in privileged EXEC mode. show class-map [class-map-name] Syntax Description class-map-name (Optional) Display the contents of the specified class map. Command Modes Privileged EXEC Command History Release 12.1(6)EA2 12.2(15)ZJ Modification This command was introduced. This command was implemented on the following platforms: Cisco 2600 series, Cisco 3600 series, and Cisco 3700 series routers. Usage Guidelines If you do not specify a class-map-name, all class maps appear. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. Examples The following is sample output from the show class-map test command: Switch# show class-map test Class Map match-all test (id 2) Match access-group name testingacl The following is sample output from the show class-map command: Switch# show class-map Class Map match-all wizard_1-1-1-2 (id 3) Match access-group name videowizard_1-1-1-2 Class Map match-all test (id 2) Match access-group name testingacl Class Map match-any class-default (id 0) Match any Class Map match-all class1 (id 5) Match access-group 103 Class Map match-all classtest (id 4) Description: This is a test. Match access-group name testingacl 214 Cisco IOS Release 12.2(2)XT, 12.2(8)T, and 12.2(15)ZJ