Cisco NME-16ES-1G User Guide - Page 230
show policy-map, policy-map configuration command.
UPC - 882658036101
View all Cisco NME-16ES-1G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 230 highlights
show policy-map 16- and 36-Port Ethernet Switch Module for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series show policy-map To display quality of service (QoS) policy maps, which define classification criteria for incoming traffic, use the show policy-map command in privileged EXEC mode. Policy maps can include policers that specify the bandwidth limitations and the action to take if the limits are exceeded. show policy-map [policy-map-name [class class-name]] Syntax Description policy-map-name class class-name (Optional) Displays the specified policy-map name. (Optional) Displays QoS policy actions for a individual class. Command Modes Privileged EXEC Command History Release 12.1(6)EA2 12.2(15)ZJ Modification This command was introduced. This command was implemented on the following platforms: Cisco 2600 series, Cisco 3600 series, and Cisco 3700 series routers. Usage Guidelines Use the show policy-map command without keywords to display all policy maps configured on the switch. Note In a policy map, the class named class-default is not supported. The switch does not filter traffic based on the policy map defined by the class class-default policy-map configuration command. Examples The following is sample output from the show policy-map command: Switch# show policy-map Policy Map wand Description: this is a description. Policy Map wizard_policy3 class wizard_1-1-1-2 Policy Map test Policy Map policytest class classtest police 10000000 8192 exceed-action drop 230 Cisco IOS Release 12.2(2)XT, 12.2(8)T, and 12.2(15)ZJ