Cisco NME-16ES-1G User Guide - Page 179
dot1x re-authentication
UPC - 882658036101
View all Cisco NME-16ES-1G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
16- and 36-Port Ethernet Switch Module for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series dot1x re-authentication dot1x re-authentication To enable periodic reauthentication of the client, use the dot1x re-authentication command in global configuration mode. To return to the default setting, use the no form of this command. dot1x re-authentication no dot1x re-authentication Syntax Description This command has no arguments or keywords. Defaults Periodic reauthentication is disabled. Command Modes Global configuration Command History Release 12.1(6)EA2 12.2(15)ZJ Modification This command was introduced. This command was implemented on the following platforms: Cisco 2600 series, Cisco 3600 series, and Cisco 3700 series routers. Usage Guidelines You configure the amount of time between periodic reauthentication attempts by using the dot1x timeout re-authperiod global configuration command. Examples The following example shows how to disable periodic reauthentication of the client: Switch(config)# no dot1x re-authentication The following example shows how to enable periodic reauthentication and set the number of seconds between reauthentication attempts to 4000 seconds: Switch(config)# dot1x re-authentication Switch(config)# dot1x timeout re-authperiod 4000 You can verify your settings by entering the show dot1x privileged EXEC command. Related Commands Command dot1x timeout re-authperiod show dot1x Description Sets the number of seconds between reauthentication attempts. Displays 802.1x statistics, administrative status, and operational status for the switch or for the specified interface. Cisco IOS Release 12.2(2)XT, 12.2(8)T, and 12.2(15)ZJ 179