Cisco WS-C2960S-24PD-L Software Guide - Page 221
Assigning a Private Profile to an LRE Port, LRE-10-1, and LRE-15LL.
View all Cisco WS-C2960S-24PD-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 221 highlights
Chapter 7 Configuring the Switch Ports Configuring the LRE Ports Assigning a Private Profile to an LRE Port Private profiles are set on a per-port basis. You can assign the same private profile or different private profiles to the LRE ports on the switch. The default active private profile on all LRE ports is LRE-10. The switch resets the ports with the updated profile settings. Beginning in privileged EXEC mode, follow these steps to assign a private profile to an LRE port: Step 1 Step 2 Command configure terminal interface LRE-interface Step 3 lre profile profile_name Step 4 Step 5 end show controllers lre profile mapping Purpose Enter global configuration mode. Enter interface configuration mode, and enter the number of the LRE port to be configured. Enter the private profile name: LRE-5, LRE-10 (default), LRE-15, LRE-10-1, LRE-10-3, LRE-10-5, LRE-5LL, LRE-10LL, and LRE-15LL. The default profile is LRE-10. Return to privileged EXEC mode. Verify the change. Use the show controllers lre privileged EXEC commands to display the LRE link statistics and profile information on the LRE ports. For information about these commands, refer to the switch command reference. 78-6511-08 Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide 7-23