Cisco WS-C2960S-24PD-L Software Guide - Page 60

Topology View Chapter 2 Getting Started with CMS The Topology view also uses a set of link icons (Figure 2-9) to show the link type and status between two devices. To select a link, click the link that you want to select. To select multiple links, press the Ctrl key, and click the links that you want to select. Figure 2-9 Topology-View Link Icons Device and Link Labels The Topology view displays device and link information by using these labels: • Cluster and switch names • Switch MAC and IP addresses • Link type between the devices • Link speed and IDs of the interfaces on both ends of the link When using these labels, keep these considerations in mind: • The IP address displays only in the labels for the command switch and member switches. • The label of a neighboring cluster icon only displays the IP address of the command-switch IP address. • The displayed link speeds are the actual link speeds except on the LRE links, which display the administratively assigned speed settings. You can change the label settings from the Topology Options window, which is displayed by selecting View > Topology Options. 2-16 Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide 78-6511-08