Cisco WS-C2960S-24PD-L Software Guide - Page 288
Step 7, Step 8, Step 9, Step 10, Step 11, Step 12, Step 13, Step 14, Step 15, Step 16
View all Cisco WS-C2960S-24PD-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 288 highlights
Recovery Procedures Chapter 9 Troubleshooting Step 7 Enter the switch IP address, and press Return: Enter IP address: ip_address Step 8 Enter the subnet mask, and press Return: Enter IP netmask: ip_netmask Step 9 Enter Y at the next prompt to specify a default gateway (router): Would you like to enter a default gateway address? [yes]: y Step 10 Enter the IP address of the default gateway, and press Return. IP address of the default gateway: ip_address Step 11 Enter a host name for the switch, and press Return. Note On a command switch, the host name is limited to 28 characters; on a member switch to 31 characters. Do not use -n, where n is a number, as the last character in a host name for any switch. Enter a host name: host_name Step 12 Enter the password of the failed command switch, and press Return. Note The password can be from 1 to 25 alphanumeric characters, can start with a number, is case sensitive, allows spaces, but ignores leading spaces. Enter enable secret: secret_password Step 13 Enter Y to enter a Telnet password: Would you like to configure a Telnet password? [yes] y Note The password can be from 1 to 25 alphanumeric characters, is case sensitive, allows spaces, but ignores leading spaces. Step 14 Enter the Telnet password, and press Return: Enter Telnet password: telnet_password Step 15 Enter Y to configure the switch as the cluster command switch. Enter N to configure it as a member switch or as a standalone switch. Note If you enter N, the switch appears as a candidate switch in Cluster Builder. In this case, the message in Step 20 does not appear. Would you like to enable as a cluster command switch? y Step 16 Assign a name to the cluster, and press Return. Enter cluster name: cls_name Note The cluster name can be 1 to 31 alphanumeric characters, dashes, or underscores. 9-22 Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide 78-6511-08