Cisco WS-C2960S-24PD-L Software Guide - Page 291
Step 10, Step 11, Step 12, Step 13, Step 14, Step 15, Step 16, Step 17
View all Cisco WS-C2960S-24PD-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 291 highlights
Chapter 9 Troubleshooting Recovery Procedures Step 10 Boot the system: switch: boot You are prompted to start the setup program. Enter N at the prompt: Continue with the configuration dialog? [yes/no]: N Step 11 At the switch prompt, change to privileged EXEC mode: switch> enable Step 12 Rename the configuration file to its original name: switch# rename flash:config.text.old flash:config.text Step 13 Copy the configuration file into memory: switch# copy flash:config.text system:running-config Source filename [config.text]? Destination filename [running-config]? Step 14 Press Return in response to the confirmation prompts. The configuration file is now reloaded. Follow the next steps to change the password. Enter global configuration mode: switch# config terminal Step 15 Change the password: switch(config)# enable secret or switch(config)# enable password Step 16 Return to privileged EXEC mode: switch(config)# exit switch# Step 17 Write the running configuration to the startup configuration file: switch# copy running-config startup-config The new password is now included in the startup configuration. 78-6511-08 Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide 9-25