Cisco WS-C2960S-24PD-L Software Guide - Page 237
VTP Version, Default VTP Configuration, Feature, Default Value
View all Cisco WS-C2960S-24PD-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 237 highlights
Chapter 8 Configuring VLANs Using VTP VTP Version Follow these guidelines when deciding which VTP version to implement: • All switches in a VTP domain must run the same VTP version. • A VTP version 2-capable switch can operate in the same VTP domain as a switch running VTP version 1 if version 2 is disabled on the version 2-capable switch. Version 2 is disabled by default. • Do not enable VTP version 2 on a switch unless all of the switches in the same VTP domain are version-2-capable. When you enable version 2 on a switch, all of the version-2-capable switches in the domain enable version 2. If there is a version 1-only switch, it will not exchange VTP information with switches with version 2 enabled. • If there are Token Ring networks in your environment (TRBRF and TRCRF), you must enable VTP version 2 for Token Ring VLAN switching to function properly. To run Token Ring and Token Ring-Net, disable VTP version 2. • Enabling or disabling VTP pruning on a VTP server enables or disables VTP pruning for the entire VTP domain. Default VTP Configuration Table 8-5 shows the default VTP configuration. Table 8-5 VTP Default Configuration Feature VTP domain name VTP mode VTP version 2 enable state VTP password VTP pruning Default Value Null. Server. Version 2 is disabled. None. Disabled. 78-6511-08 Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide 8-15