Cisco WS-C2960S-24PD-L Software Guide - Page 50
Front-Panel Images, Wavelength, Color
View all Cisco WS-C2960S-24PD-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Front Panel View Chapter 2 Getting Started with CMS Front-Panel Images You can manage the switch from a remote station by using the front-panel images. The front-panel images are updated based on the network polling interval that you set from CMS > Preferences. This section includes descriptions of the LED images. Similar descriptions of the switch LEDs are provided in the switch hardware installation guide. Note The Preferences window is not available if your switch access level is read-only. For more information about the read-only access mode, see the "Access Modes in CMS" section on page 2-33. Figure 2-5 shows the port icons as they appear in the front-panel images. To select a port, click the port on the front-panel image. The port is then highlighted with a yellow outline. To select multiple ports, you can: • Press the left mouse button, drag the pointer over the group of ports that you want to select, and then release the mouse button. • Press the Ctrl key, and click the ports that you want to select. • Right-click a port, and select Select All Ports from the port popup menu. Figure 2-5 Port Icons Table 2-2 describes the colors representing the wavelengths on the CWDM GBIC modules. For port status LED information, see the "Port Modes and LEDs" section on page 2-8. Table 2-2 Port Icon Colors for the CWDM GBIC Module Ports Wavelength 1470 nanometers (nm) 1490 nm 1510 nm 1530 nm 1550 nm 1570 nm 1590 nm 1610 nm Color Gray Violet Blue Green Yellow Orange Red Brown Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide 2-6 78-6511-08