Compaq 270680-003 Compaq Reference Guide Deskpro 4000 and Deskpro 6000 Series - Page 101
Installing an Expansion Board, Removing an Expansion Slot Cover
View all Compaq 270680-003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Installing an Expansion Board Your computer contains expansion slots, as follows: Expansion Slots in Pentium-Based Expansion Board Cage Expansion Slots in Pentium IIBased Expansion Board Cage 1 PCI (Peripheral Component Interconnect) expansion slots 2 PCI/ISA shared expansion slot 3 ISA (Industry Standard Architecture) expansion slots The graphics controller resides in either a PCI slot in the expansion board cage, or in the AGP slot on the system board. Removing an Expansion Slot Cover To remove an expansion slot cover, follow these steps: 1. Remove the expansion board cage from the computer chassis. 2. Locate the correct vacant slot in the expansion board cage. Reference Guide 6-19
Reference Guide
6-19
Installing an
Expansion Board
Your computer contains expansion slots, as follows:
Expansion Slots in Pentium-Based Expansion Board Cage
Expansion Slots in Pentium IIĀ±Based Expansion Board Cage
1
PCI (Peripheral Component Interconnect) expansion slots
2
PCI/ISA shared expansion slot
3
ISA (Industry Standard Architecture) expansion slots
The graphics controller resides in either a PCI slot in the
expansion board cage, or in the AGP slot on the system
board.
Removing an Expansion Slot Cover
To remove an expansion slot cover, follow these steps:
1. Remove the expansion board cage from the computer
chassis.
2. Locate the correct vacant slot in the expansion board cage.